An engagement makes a girl happy even more than a wedding. The lover hands over a beautiful box and asks to become his wife. But the delight will fade if the ring turns out to be too tight. Unfortunately, young people rarely choose wedding rings with their chosen ones. Some people simply don’t think about it, others want to make it a surprise. The result is the same - unsuccessful attempts to squeeze a finger into the golden band, a ruined mood. It is difficult to correct the error: the product cannot be exchanged or returned.
If this happened to you, don't be sad and don't rush into a new purchase. Gold is malleable and can be processed. You can increase the size of the wedding ring at home, entrust it to the groom or a friend. Or maybe you yourself own a hammer or soldering iron? Let's see what can be done.
Changing the size of the wedding ring
Determine the correct size
Of course, the best thing when buying such an expensive gift is to know the exact size, or even better, buy it in the presence of the lady of your heart. In this case, you need to keep in mind that your fingers may swell in the morning, especially in hot weather. It can also occur after exercise, as well as at elevated temperatures during illness.
Important! The thickness of the fingers on the left and right hands is different.
If you don’t know the exact size, you can calculate it using simple methods at home:
- A strip 1 cm wide is inserted inside the product. A mark is made with a pencil in the place where one of the edges ends. The length of the marked strip is measured with a ruler. The resulting number is divided by 3.14 - this will be the size of the jewelry.
- The most accurate way at home is to measure the internal diameter with a caliper, but not everyone has one.
- You can measure using coins, if you have them: 1 ruble - size 21, 50 kopecks - size 19.5, 5 kopecks - 19, 10 kopecks - 18, 1 kopeck - size 16.
- The simplest, but not the most accurate, is to measure the size of the ring with a ruler, and you need to take the inner diameter.
How to increase ring size at home
Changing the size of a product is not as easy as it might seem at first glance. Therefore, in most cases, experts recommend not even trying. There is a huge risk that you will damage the product. In such cases, it is best to contact specialists.
However, if you are still determined, you will need the following tools for the job:
- Special crossbar.
- Gas-burner.
- Small rubber mallet.
But keep in mind that having all these tools does not give any guarantee that you will succeed. First, you need to take the ring and clamp it, for example, with pliers or round nose pliers. Then you need to turn on the burner and heat the product to its characteristic red color. Next, you should leave the decoration for a few minutes so that it cools down a little. And when it is slightly warm, all you have to do is insert it into the crossbar and start rolling.
We take into account the features of different jewelry
The most accurate way is to contact a jeweler or jewelry store.
As you can see, the risk of damaging your jewelry is very high, so the most reliable way is to contact a jewelry workshop.
If you need to change your ring size, consider the following points:
- If the surface is smooth, then the master will be able to increase it even by 2-3 sizes, but if the jewelry has a pattern or stones, then it will not be so plastic, in this case enlargement is not recommended.
- Decide which finger you will wear the jewelry on to determine the exact diameter.
- Try on the product in a calm state - if your fingers are swollen, then when the swelling subsides the jewelry will be great for you.
- Make inquiries about the masters; it is better to talk to 2-3 masters yourself and discuss the details. The price should not be artificially inflated. If the master told you in detail about the upcoming procedure, warned you about possible risks, but gave a guarantee on the quality of his work, then you can opt for such a workshop. Please note that gold is a fairly soft and pliable material.
Important! Repair of platinum products can only be carried out using special expensive equipment; not every workshop can afford it, so the price will be higher accordingly.
Application of mechanical stretching of metal
When answering the question of whether it is possible to increase the size of the ring, one cannot help but recall the method of mechanical stretching of the metal. However, the method is not suitable for products with complex decorative patterns. The presence of a small stone in this case is allowed. The ring itself should also not be too wide. Its approximate thickness should not be more than 10 mm.
During the work process, the master usually performs calculations and determines the size. After that, he rotates the fixed decoration on a special crossbar and heats it. Thus, he manages to achieve suitable dimensions of the product. At the end of the procedure, it is necessary to eliminate roughness and uneven areas of the tire. To do this, it is cleaned and polished.
Is it possible to stretch the ring?
If you still end up buying jewelry that doesn’t fit the size, for example, a silver or gold wedding ring, and it cannot be returned or exchanged, then what should you do? How to expand a gold ring at home?
It's not as simple as it seems. What can be done in such a situation?
- You need to find a metal cone of the appropriate size. Clean it thoroughly and polish it.
- Wrap the cone in foil. This is done to ensure that there are no scratches on the product.
- Warm the ring well and put it on the cone.
- By carefully tapping the end of the cone with a hammer, we try to expand the product.
Enlargement of a wedding ring: in what cases should it be done?
Sometimes the owner of a wedding ring changes in build after the wedding. As soon as you lose a little weight or gain weight, the jewelry no longer fits your size. Cases when enlarging a wedding ring is necessary:
- If, under some conditions, the future wife or husband could not be present when purchasing the jewelry, and it was purchased without their participation;
- The wedding ring is a family heirloom and is not the right size for the new bride or groom;
- If the spouses’ physical shape has changed after several years of marriage, and the size of the jewelry has become completely inappropriate;
- If, with swelling of the hands, the product strongly compresses the finger and causes improper blood circulation;
- The ring was purchased from an online store, and the appropriate size was determined by eye.
Wearing a ring that is not your size will cause you great discomfort. Since there are different ways to increase jewelry, why not use them?
Ways to stretch a ring
Since the method of how to expand a ring at home is not the easiest and gives a guaranteed result, let’s turn to professionals. If there are stones on the jewelry, for example, a diamond ring, then they will need to be temporarily removed so as not to accidentally break or deform. There are 4 stretching methods.
Rolling out
The ring is rolled out to the desired size using a special tool. This method is only suitable for fairly thick products. A thin piece of jewelry may not survive and simply break.
Inserting a piece of material:
- The ring is cut in one place, usually near the sample.
- A piece of metal of the same quality and grade is inserted into the cut site so that the fragment does not differ in appearance.
- The soldering point is welded. The seam is not visible to the naked eye, its thickness does not exceed 0.1 mm
Boring
This is a method in which a portion of the metal is ground off inside the jewelry. The appearance of the product does not change. How much it costs needs to be clarified directly in the workshop.
Stretching with Pinocchio
“Pinocchio” is a special cone-shaped device on which jewelry is placed. Before processing, the ring is heated and pulled onto the cone.
Simple and safe option with boring
It is quite possible to increase the size of a ring with a stone in the simplest and safest way - through boring the product. This procedure involves cutting out the inner layer of the tire. It allows you to enlarge your ring by about half a size. The method is ideal for products with decorative and precious stones that have a wide shank.
The process is usually performed using a special machine with a clamp. It is not suitable for rings that are too thin. Only for wide ones. Takes approximately 10-30 minutes. However, this method has its drawbacks. Due to the use of rolling or boring, the thickness of the tire will decrease. It will become thinner than its original thickness.
Is it possible to roll out the ring yourself?
Unfortunately, it is quite difficult to increase your ring size at home. Because for this, at a minimum, you will need experience and a special tool. Not every man has a special deadbolt, a gas burner and a hammer with a rubber surface in his garage or closet. In most cases, a special rolling device is used. But even if all this is present, lack of experience can lead to irreparable damage to the ring.
But the technology used by jewelers to increase sizes using a crossbar and a special device is quite clear.
· First, the ring is heated red-hot using a gas burner.
· Then they allow it to cool on its own, while preparing the tools.
· The slightly cooled decoration is inserted into the device and gradually rolled out. It is important not to press too hard on the shackle right away, otherwise there is a risk of damaging it.
True, you will have to do it a little differently, the metal is valuable and you cannot ruin the ring.
As an option I can suggest the following.
It is necessary to select (turn, find.) a metal cone of a suitable size (like a beard).
Clean it thoroughly and polish it.
To prevent scratches on the ring, you need to wrap the cone with foil (or something similar).
Select in advance a metal hole of a suitable size in some heavy metal blank (structure), and also put foil on top of it.
The ring should be warmed up well and placed on the cone.
We insert the cone (don't forget about the foil) into the hole.
The ring should rest against the metal.
And carefully, tapping the end of the cone with a hammer, we try to expand the ring.
There was no need to stand on ceremony with copper and aluminum washers and they increased their internal diameter well.
In any case, if possible, it is better to contact specialists.
Reproduction of materials on the Internet is permitted with the obligatory indication of a direct link to the “Moscow FAQ”
Good day, dear visitor to the “Your Jeweler” website. Today, meet a new video that will tell and show you how to make your ring size larger. Now the description: in order to enlarge the ring, you must first heat it and let it cool without using water, that is, leave it aside for a while. Do not forget that if there are stones in the ring, you cannot heat them, but only heat the scent of the ring, so the stones will not deteriorate.
Also, pay attention to the thickness of the ring, whether it allows you to make it a little thinner. In cases where the ring is too thin, it will not be possible to roll it out, but you will have to cut and solder an additional piece of metal. When the ring has cooled, measure its size and begin rolling. To do this, we use a special installation, which is shown in the video, this one is blue. You can buy it in jewelry tool stores; at the time of purchase (summer 2013) it cost 1,500 rubles.
With its help, we gradually roll out the ring and do not forget to measure the size so as not to miss, otherwise you will have to cut and make smaller ones. After the size is adjusted, we align the ring on the crossbar, polish it and wash it in an ultrasonic bath. After which we give it to the client and receive money. That's the whole process! Subscribe to my You Tube channel, as well as the newsletter on my website. Order the moments that interest you, and as far as possible I will record video clips and thereby help in some way.
When choosing a ring as a gift, it’s easy to miscalculate the size
.
In most cases, the jewelry can be reduced
or
increased
to the required diameter to ensure it fits perfectly. However, this will be much more difficult to do if a large stone or small placer is attached to the product. And exclusive designer rings with a circular pattern or engraving, enamel or blackening cannot be enlarged or reduced without losing their original appearance.
It is technologically easier to increase the size of a finished product than to reduce it. Gold is a very ductile metal - it easily stretches by 1-2 sizes under the influence of temperature.
As for wide rings that require significant diameter correction, this technique will no longer work. The jeweler will use an insert of the same grade of metal to increase the size of the piece.
Smooth rings without inserts, engravings or stones are usually reduced in size by compression
. This way the product will deform less, and the decoration will retain its original appearance and ideal shape.
However, this procedure is not suitable for wide rings (7-8 or more millimeters). In this case, the craftsman will cut out a piece of metal and bend the ring, soldering the resulting joint.
Changing the ring size
First of all, it must be said that you can increase or decrease the size of a ring only in a jewelry workshop. It is impossible to do this at home without the appropriate equipment and skills.
- In the price list of jewelry workshops you will definitely find a repair service for items made of precious metals. You need to be especially careful when changing ring sizes. First of all, study the surface of the product, if it is smooth, then the master will be able to increase it even by 3 sizes, and if there are notches, patterns or stones on the ring, then it will not be so plastic.
- You must clearly know which finger you will wear the ring on in order to measure the diameter of the desired finger. You should also determine the initial size of the jewelry, visit showrooms and use special devices and size samples.
- Try on rings in a calm state. During hot weather, after serious physical exertion, or during illness, there may be swelling on the fingers, which will make it difficult to determine the exact size.
- Inquire about workshops that specialize in fitting and repairing jewelry. The cost of such services should not be artificially high. Seek advice and recommendations from friends and consultants in jewelry stores.
- Before submitting the product for adjustment, go to several workshops and personally talk with 2-3 craftsmen, discuss the details of the upcoming procedure. If you need to reduce the size of the ring, this can be done by compression (this execution is only suitable for products with a smooth surface). The correct shape of the ring is ensured by uniform compression on all sides at the same time. Another method is to cut out a piece of metal, suitable for products with notches. Only very professional craftsmen undertake resizing a product that has an engraving on it, due to the high risk of damage.
- If you need to cut metal, it is best to make the cut close to the sample, as it will be less noticeable.
- Repair of platinum products is carried out only with special equipment, which costs a lot of money, so not every workshop can afford it.
- If the master told you in detail about the upcoming procedure, warned you about possible risks, but offered a guarantee for the quality of the work performed, then you can opt for such a workshop.
The ring is an indispensable decoration for fingers, known since ancient times. Today you can choose a ring of almost any size. But sometimes an unpleasant situation occurs - a favorite ring suddenly becomes small, or a gift does not fit on your finger. In this case, rolling it out in a jewelry salon can help. But this is quite expensive, so it is better to find out how to roll out a ring at home and whether it is even possible. It wouldn’t hurt to find out whether this particular product can be enlarged or not.
What kind of rings can you roll out?
Increasing the ring size by rolling has some features that must be taken into account. Unfortunately, many types of rings are not rolled out due to completely natural processes during rolling:
1. Rings with rotating inserts.
2. In most cases, the dimensions of bimetallic rings do not change.
3. If there is a drawing or a stone, this is also prohibited.
Based on this list, the answer to the question whether it is possible to roll out a ring with stones alone is absolutely not. In this case, only one metal base may remain, and the pebbles will leave their nests due to stretching and deformation of the metal.
Is it possible to roll out the ring yourself?
Unfortunately, it is quite difficult to increase your ring size at home. Because for this, at a minimum, you will need experience and a special tool. Not every man has a special deadbolt, a gas burner and a hammer with a rubber surface in his garage or closet. In most cases, a special rolling device is used. But even if all this is present, a lack of experience can lead to irreparable damage to the ring.
But the technology used by jewelers to increase sizes using a crossbar and a special device is quite clear:
· First, the ring is heated red-hot using a gas burner.
· Then they allow it to cool on its own, while preparing the tools.
· The slightly cooled decoration is inserted into the device and gradually rolled out. It is important not to press too hard on the shackle right away, otherwise there is a risk of damaging it.
· Periodically remove the ring and adjust the existing stretch.
· If necessary, the surface is straightened by pressing on the crossbar and polished.
There is one very important nuance that you need to pay attention to. It depends on how long the ring can be rolled out. You need to pay attention to the thickness of the bow. If it is very thin and fragile, rolling it out is not recommended; there is a risk of it breaking. But in general, the thicker the bow, the larger the size you can roll it out to. Naturally, the rings are not rubber, and stretching from size 13 to 21 will not work. The limit is three or four positions in the best case.
“Network publication “WomansDay.ru (WomansDey.ru)” Certificate of registration of mass media EL No. FS77-67790, issued by the Federal Service for Supervision of Communications, Information Technologies and Mass Communications (Roskomnadzor) December 13, 2021 16+. Copyright (c) Hirst Shkulev Publishing LLC. 2021. Any reproduction of site materials without the permission of the editors is prohibited. Contact information for government agencies (including Roskomnadzor):
Gold has excellent ductility, so if necessary, the size of a gold ring can be relatively easily changed by decreasing or increasing it by one or two sizes. It is not recommended to perform such an operation at home, even if you have the appropriate tools, since in the wrong hands the jewelry can be irreparably deformed.
The most common way to increase ring size is mechanical. The master first checks what the true size of the product is, and then determines how much it needs to be increased. After measurements, the ring is treated with a burner flame. When it cools down, the product is put on a special crossbar. Using a roller that matches the profile of the product, the ring is stretched to the required size. All that remains is to align the ends and polish the ring to its original shine.
There is a more labor-intensive way to increase the ring size. In this case, it is expanded by inserting a piece of metal of a similar standard. First, a joint is formed, where a piece of material is placed and carefully soldered when heated with the flame of a heating pad. The renewed product is then bleached, dried and carefully processed with a jewelry file to remove possible protrusions and depressions.
When choosing a specific method, experts always base it on the size of the ring. For a thin product, simple mechanical stretching is most suitable. If the ring is massive and thick, it is easier and more reliable to use the insertion method. In the simplest case, when the ring needs to be enlarged by just a fraction of a millimeter, sometimes its inner surface is simply bored, removing the thinnest layer of metal.
If the ring has inserts in the form of stones, they are often dismantled before work. This is done in order to reduce the risk of stress appearing in the stone, which may well lead to its irreparable deformation. After increasing the size of the ring, the stones can be easily inserted into place, securing them accordingly.
A wedding ring is a symbol of marriage, so spouses wear it on the ring finger of their right hand as a sign of fidelity to each other. However, there are situations that require increasing its size. Typically, a traditional wedding ring is made of gold, which is malleable. Thus, it will not be difficult for a jeweler to change such an important piece of jewelry by one or two sizes.
Undoubtedly, the complexity of the work is determined directly by the master and it depends specifically on the type of wedding ring: smooth or with stones. It is necessary to take into account that the pricing policy of each individual company is varied, so you need to contact only those specialists who do not raise any doubts about their professionalism and competence. Otherwise, such an important element of the marriage risks being damaged irrevocably.
The main ways to increase the size of a wedding ring are: stretching the metal on the crossbar, as well as inserting a piece of gold of the same standard. First of all, the jeweler measures the exact size of the ring, after which he determines exactly how much the product should be enlarged. Then, the master anneals the ring with the flame of a special burner and when it cools down a little, he places the crossbar on the tension roller prepared. After this, a roller is installed, which in shape corresponds to the profile of the gold jewelry. Next, the jeweler, by rotating the bolt handle, moves the guide axis and, accordingly, the clamping handle, and with his free hand he presses the roller to the ring, ensuring that it is seated on the bolt. Thus, when the ring reaches the desired size, the master will wash it, bleach it and straighten the ends of the ring. Ultimately, the product is polished, thereby acquiring its original shine.
If the jewelry is enlarged by inserting a piece of gold, then it is necessary to apply small fragments of this metal of the same standard to the joint, and then solder them under the flame of a burner. After which the jewelry is bleached, dried and the inserted piece is adjusted so that there are no protrusions or depressions. It should be noted that if the wedding ring is thin, then the best method of resizing it is mechanical stretching. On the contrary, a thick ring, as a rule, is difficult to stretch, so it is advisable to insert a piece of gold.
Enlargement of a gold ring with stones is usually carried out by an experienced craftsman in the following sequence: removes the stone from the mount, performs certain procedures with this metal in order to change the size, and then inserts the stone back. It must be remembered that such an increase in the size of a ring with a stone will cost the client much more.
Today there are ways to adjust a ring to the desired size
. worked to perfection.
In a jewelry workshop, such work can be completed in the presence of the customer in 10-15 minutes. The main thing is that the ring falls into the capable hands of a jeweler who has earned positive reviews for his work.
How to reduce ring size?
To make a ring smaller, jewelers use three methods.
- Cutting out a piece of the rim.
This method is used for rings decorated with precious stones to prevent damage to the overall structure of the jewelry. It is recommended to first remove all stones from the setting, especially when soldering the ring with an open fire.
For rings made of white gold, with enamel or mother of pearl, laser soldering is used.
If the ring is one size too big. The jeweler cuts a piece of the base 3.14 mm long, into two sizes - 6.28 mm, and then grinds and polishes the joint.
This method is usually used to reduce the size of wedding rings without precious stones or decorative elements.
If the ring needs to be adjusted by half a size, it is simply knocked down, and if by 1-1.5-2 sizes, it is preheated, increasing the elasticity of the metal, and then knocked down to the desired size. The carbon deposits are cleaned off and the product is polished.
- Insertion without sawing.
The method is expensive, but eliminates all signs of impact on the decoration. The ring remains the same, only its inner diameter decreases. This happens by soldering a base metal plate or an additional ring into the inside of the product.
Which rings enlarge and which don’t?
The easiest way is to increase the size of a smooth engagement ring: even a novice jeweler can cope with the task. Models with more complex designs require skill and experience. An increase is difficult if the product contains:
- engraving;
- openwork patterns or diamond cut;
- inserts of one or more stones;
- rhodium or other galvanic coating;
- jewelry enamel, ceramics or other heat-sensitive materials;
- several jewelry alloys of different refractoriness;
- platinum and other refractory metals;
- costume jewelry alloys of unknown composition;
- The weight of the product does not exceed 1 gram.
Before resizing the ring, the stones are removed or protected with a special paste. If this is not done, they may change color, crack, or fall out of the setting. The same fate awaits enamel and ceramics. Therefore, usually, if the jewelry has inserts, the craftsman charges more for the work.
Rhodium-plated products often change color when heated. In addition, the thickness of the galvanic coating, its uniformity and uniformity are disrupted. If the size of such a ring is to be increased, it may need to be re-rhodium-plated.
Jewelry with openwork patterns, engravings and diamond edges may become deformed when magnified. There is little chance of restoring their original appearance: the craftsman will have to almost completely redo the product. Therefore, before the ring enlargement procedure, be sure to consult a jeweler.
On the subject: How to pump up your arms at home without dumbbells
Source
Which rings cannot be enlarged?
The problem of small ring size is not always solved. Some jewelry will still have to be put aside until you lose weight or passed on to the younger generation. Cannot enlarge:
costume jewelry, because jewelers do not risk working with alloys whose composition is unknown. It is not clear how this or that metal will behave when heated and mechanically affected.
rings with engraving, under the influence the inscription will deteriorate and lose its beauty.
openwork rings, because patterns may “float”, which certainly will not make the product better.
Difficulties arise with platinum rings and jewelry with stones. Platinum is a very demanding metal that requires special equipment.
Working with stones requires special attention. They do not always retain their ideal appearance when heated, so they are removed before work. For products with scattered minerals, it is better to use the expansion method by insertion. In any case, the work is carried out carefully and exclusively by professionals who have the necessary equipment and are familiar with the specifics.
What to do with a small wedding ring if you don’t use drastic measures
There are people who are afraid to take their jewelry to workshops. There can be many reasons for this - from fear of being stolen to religious beliefs. At the same time, hand over the ring in order to get another one for it, pawn it, etc. not an option for them. Just like putting the jewelry in the box. In this case, there are options for solving this problem.
For example, you can hang a small ring on a chain and wear it as a locket.
This method is quite controversial, because... It’s still a ring, and pendants or a cross are often worn on the neck. However, if this ring is not just a wedding ring, but a wedding ring, you can do the same with it.
In addition, experts assure that the ring cannot become small out of the blue. If your fingers are plump, then there is a logical explanation for this. For example, hormonal problems that cause you to gain weight. Or swelling began to appear. In both cases, this is not good. To make the ring fit you again, take care of your health and eliminate these problems.
There is nothing terrible in the situation of reducing the size of the ring. The main thing is not to panic and make an informed decision. In any case, the choice will be yours.
Reducing the size of jewelry rings:
If suddenly you were given a ring, and it just so happens that it doesn’t quite suit you in size, then returning the gift is somehow wrong, and besides, you liked it, but because it’s too big, or vice versa small you cannot wear your new precious jewelry. But don’t worry, because the problem of a person’s ring being too big is quite common, but this problem can be solved.
Reduce the diameter of a jewelry ring using compression - from 300 rubles.
Reduce the size of a gold ring - from 400 rubles.
It is also possible to insert metal inside the ring - from 1000 rubles (excluding metal).
Today, there are several ways to reduce a ring. This procedure can be carried out by cutting out excess metal. You can also resize the product using compression. But if your jewelry contains precious stones, then the compression method is not suitable. Another way is not to cut metal from the ring, but, on the contrary, to add it. The method is very unusual, but it is universal. That is, by adding metal you can reduce absolutely any ring.
Features of repairing platinum jewelry
Expensive platinum rings are very difficult to reduce or enlarge
, therefore, when ordering or purchasing a product, make sure that the size is chosen perfectly. This hard and refractory metal is difficult to process, and the production of jewelry requires a lot of experience and high qualifications from the craftsman.
To change the diameter of a finished platinum ring, specialized equipment and the use of laser processing technologies are required. To adjust the size of the product
, it is necessary to heat it to a very high temperature, and this is impossible in the conditions of most repair shops. In addition, such procedures are fraught with loss of the appearance of the product: the solder used may not only differ in color from snow-white platinum, but also turn black.
A product made of gold or silver can be adjusted to size. In this case, you will not even notice the joint or stretch on the ring. Before adjusting the diameter, correctly specify the amount by which you need to reduce or increase the decoration.
“Precious stories” Kozmas
When choosing a ring as a gift, it is easy to make a mistake with the size.
In most cases, decoration can be
reduced
or.
Unusual designs, symbols, inscriptions - all this can be applied to the finished jewelry using the
.
To determine the size of the future ring
Jewelry designers use a special
finger gauge
- a set of rings from 13 to 25 sizes c.
Rings made of precious metals are the most popular gifts for women. Having received such a gift from a loved one, an unpleasant surprise is the wrong size. And sometimes decoration just becomes not enough for you. And then the question arises of how to stretch the ring at home. We will look at possible solutions to this problem in this article.
