How to make swans for a wedding with your own hands from ribbons

How to make swans using the kanzashi technique: a master class with a description of the stages

You can make swans from satin ribbons for yourself or as a gift, for example, for a wedding. Elegant symbolic items will become an original decoration for a wedding ceremony, and then turn into a talisman that will preserve the love of a married couple for many years.

To make a kanzashi style swan you will need:

• white satin ribbons 1.2 and 2.5 cm wide;
• satin ribbons of black and red colors 1.2 cm wide;
• wire;
• yarn;
• scissors;
• glue gun;
• wire cutters;
• candle.

There are good tutorials on the Internet with photos and videos that tell you how to make a swan from ribbons step by step. It is necessary to act in the following sequence:

1. First of all, you need to make the frame of the bird. To do this, bend the wire into a hook and form a loop from the bottom edge. This will be the base of the figure. From separate pieces of wire of the same length, bend two loops for the wings and attach them to the base.
2. The frame is wrapped with yarn so that it is convenient to glue feather petals to it.
3. The free edge of the hook is wrapped with red ribbon, indicating the bird's beak. A piece of black tape is glued a little higher; these will be the eyes.
4. Using the kanzashi technique, sharp white petals are prepared. Petals are made from a 2.5 cm ribbon and pasted over the chest, back and wings of the swan. From a 1.2 cm ribbon - head and neck. Make several elongated wide petals and attach them to the tail.
5. The graceful snow-white bird is ready! It can be decorated with pearls and rhinestones, sprinkled with sparkles. And if swans are planned for a wedding, you can make them a top hat and veil.

Royal birds also have a feng shui significance. Swans looking at each other using the kanzashi technique is a talisman of love and tenderness towards each other.

Swans made of penoplex and polymer clay

First, I drew a silhouette of a swan (head and neck) on an A4 sheet of paper, then transferred the drawing onto penoplex (technoplex)

…. my technoplex is 4.5 cm thick

...cut out. I want to say that I managed to do this by gritting my teeth, i.e. It’s not very easy to cut it with a knife, and the sound is terribly unpleasant - squeaky))) I began to “sand” it with sandpaper until such blanks emerged. By the way, penoplex lends itself very well to sandpaper (I noticed this even when creating a candy doll)

...from such clay I molded the cheeks and bridge of the nose

glued it and left it to dry

I cut out an egg-shaped oval from penoplex, about 25-27 cm long and 13-15 cm wide, and made a kind of puzzle on the wide side of the oval. I cut it out by eye, without measurements, periodically substituting the base of the neck to adjust it to size. And also, I made 2 of these blanks and glued them together

Here in the photo you can see how I attached the neck to the oval and fixed it with titanium glue.

And here my “jambs” are visible in the form of unevenness in some places, no matter how well I sand, for a perfectly smooth surface it is better to apply a thin layer of putty, then after drying, work again with sandpaper. I also “built up” a beak from the same clay, since in the previous photos you may have noticed that the beaks of my swans looked more like ducks)))

I painted the beak, nose, and eyes with acrylic paints. I painted the neck with white glossy acrylic.

The next stage is the plumage of swans)) I cut out strips of floral organza 10 cm wide, 50-70 cm long, folded in half and gathered on a thread. It took about 6 m of organza for two swans

I glued the resulting “collars” onto the oval body, then began to dress up the swans

When copying, an active link to Russian-handmade.com is required!

Imitation of cast iron and rust. Box BOOK-DOOR

Author: pupusk · Published 05/26/2014 · Last modified 06/24/2017

Handmade souvenir – BOUQUET OF ROSES in a coffee cup

Author: pupusk · Published 06/13/2014 · Last modified 06/24/2017

CANDIES - gift packaging made of paper

Author: pupusk · Published 03/11/2015 · Last modified 06/24/2017

Add a comment Cancel reply

You must be logged in to post a comment.

Source

Basic information

Naturally, you can participate with your products in all kinds of competitions. Just look at those products that took high places in handicraft competitions.

But this is not the most important thing. The fact is that many newlyweds order such birds for their weddings. So making them is a great business idea. For example, such things are being dismantled very actively.

How is everything done?

You need to understand that the work is very painstaking. It can take up to a month for two birds. It needs to be decorated with high quality. To make it easier for you to understand everything, just use the master class below.

As you can see, you really need to try. But the result is worth it. Good luck!

Source

DIY swans made of satin ribbons

DIY swans made of satin ribbons

As a preface

Surely you have seen swans made from satin ribbons. They look very cool and attractive. They combine harmony and tenderness. But almost anyone can make them.

Naturally, you can participate with your products in all kinds of competitions. Just look at those products that took high places in handicraft competitions.

But this is not the most important thing. The fact is that many newlyweds order such birds for their weddings. So making them is a great business idea. For example, such things are being dismantled very actively.

How to make a swan from satin ribbons

• June 19, 2019
• Needlework
• Natalia Penchkovskaya

The Japanese art of folding petals and leaves from pieces of fabric is called kanzashi. Every year it gains an increasing number of fans all over the world. Our craftsmen most often use satin or crepe ribbons for such crafts. In the article we will consider the procedure for making a beautiful bird, a symbol of marital fidelity and devoted love - a swan from satin ribbons. Knowing the basics of kanzashi, you can easily create both a flat figurine of a bird and a three-dimensional version for decorating a room for a wedding celebration.

DIY swans made of polystyrene foam. Master class with step-by-step photos

The swan, due to its size, strength, beauty and majestic posture, has long been rightly called the most beautiful waterfowl. White as snow, with shiny, transparent eyes, with a black and red nose, with a long, flexible and beautiful neck, he is inexpressibly beautiful when he calmly swims between the green reeds on the dark blue smooth surface of the water. And how many poems and songs have been composed about swan fidelity!

To work you need: - polystyrene foam (ceiling tiles without a pattern); - a knife with a sharp end (can be a stationery one); - Titan glue, gouache; - stationery pins

We recommend watching:

Good afternoon Alexander Semenovich! Thank you very much for the invitation. I watched it with pleasure several times. There is such lightness, grace and beauty in this work. The most important thing is KINDNESS OF SOUL AND SINCERENESS. I will gladly take this master class as a souvenir and let Karina’s hands and imagination always delight everyone.

What a beauty, look! Two swans soar in love. Yamashkina Karina's eyes are burning with pleasure.

Thank you, sweetie Karina! Let the white light in your soul sparkle playfully every time and don’t let your hand get tired.

My vote to YOU ​​+1

Thank you for the invitation, Alexander Semenovich! I envy your children - they are lucky to have a teacher. To teach how to make such beauty must come from the heart. It doesn’t seem difficult, but it’s so pleasing to the eye and heart! The master class is laconic like a man: there is nothing superfluous. High-quality, large photographs, brief explanations for them. The set goals and objectives were successfully implemented. Good luck to you and Karina and my vote! On the Internet I came across these words (author unknown):

It has been this way since ancient times: These birds are a symbol of fidelity. Looking at their reflection, Two white swans are gliding along the surface of the water, Admiring all people.

This is about your craft.

How to make petals

A basic kanzashi petal can be easily created using candle fire. First of all, cut a large number of identical squares. Their number depends on the size of the swan made of satin ribbons.

Melt the tape at the cut points with a candle so that the threads do not fray. Next you need to fold the fabric diagonally, then in half two more times. Grab the sharp edge of the resulting triangle with tweezers and cut it off. After holding the fabric over the fire for a while, you will see that all layers are connected with a strong seam.

To create a swan from satin ribbons, you can use another method of folding the kanzashi element, as in the photo above. This petal is also folded from a square, first diagonally, and then in half again. The edges are connected in the center, straightening the fabric with your fingers so that the folds look the same, squeeze the edge of the fabric with tweezers, trim off the excess with scissors and singe the fastening of all layers with a candle. When many small parts have been collected, you can start working on a swan made of satin ribbons.

How to draw a swan

In this quick tutorial you'll learn how to draw a Swan in 5 easy steps - great for kids and novice artists.

The images above show you what your finished drawing will look like and the steps involved.

Below are the individual steps - you can click on each one to get a high-resolution printable PDF version.

Below you can read some interesting facts about the swan.

Be sure to also check out any of the hundreds of drawing tutorials grouped by category.

How to Draw a Swan - Step by Step Tutorial

Step 1:

Let's draw a swan! For the first wing, draw a triangle shape to start. To make the feather details, draw short, curved lines along the side of your triangle, moving the lines closer and closer to the inside as you go. On the last curved line, continue tracing so that the line ends almost completely at the front. The bottom of the wing should rise, and its pointed end should stick out in the air.

Step 2:

For the head, draw a small circle and from there draw long, curved lines, keeping them aligned the entire time. Hint: The head and neck are finished, they look like a big S!

Step 3:

Draw the second wing by drawing a line from the neck to the back of the first wing, keeping it pointed! This wing is on the other side of the swan's body, so don't worry if you don't see it that often, it hides

Step 4:

Add a triangle to the head for the beak.

Step 5:

Finally, add a medium sized dot for the eye. You have a swan! Did you know that even in water, swan feathers do not get wet!

Interesting facts about swans

Swans are birds belonging to the family Anatidae, which also includes geese and ducks. Swans are among the largest flying birds in the world. They are known for their white body and long neck, although there are also black swans.

Did you know?

• Male swans are called cob swans, female swans are called feather swans, and babies are called swan swans.
• Pens typically lay five to eight eggs at a time.
• Swans take about 14 weeks to learn to fly.
• Even in water, swan feathers do not get wet.
• Adult swans weigh about 33 pounds and have an average wingspan of 10 feet.
• There are six to seven species of swans. These include the trumpeter swan, whooper swan and mute swan.

The swan is a symbol of love and fidelity as they mate for life, which is why wedding decorations include swans. There are many popular operas, plays and stories about swans. One famous story is The Ugly Duckling, which is about a swan who is mistaken for a duck and grows up to be a beautiful swan. Swan Lake is one of the most famous ballets in history.

.

Base for the figure

If a flat figure of a swan can be made on thick cardboard, then for a three-dimensional version of the bird you will need a base. It is made from various available materials. Some craftsmen sew it from fabric according to a pattern and fill the inside of the craft with padding polyester or stuff it with cotton wool, and then cover the figure with satin details.

Our sample uses wire folded in half. Using pliers, it is easy to give it the desired shape with a curved neck and leave a wide loop at the bottom for the body so that the swan made of satin ribbons maintains a vertical position. Be sure to wrap the wire figure with several layers of yarn.

Working with Ribbon

Making crafts begins with the bird's head. Wrap a thin red ribbon tightly around the narrow beak. For attachment, it is most convenient to use a glue gun, although some craftsmen prefer transparent Moment glue. Next, a thin black strip is glued on to form the eyes.

The neck can be decorated with either small kanzashi petals or woven strips. In this case, it turns out smoother. On the body, the details are arranged with a sharp edge towards the tail, filling the entire base.

The wings are made separately. Cut out the felt base of the required shape and attach the petals with hot glue, starting from the narrow part. All that remains is to attach the finished parts to the body.

Now you know how to make a swan from satin ribbons with your own hands. Try it, you will definitely succeed!

Source

Candy swans master class

Swans are a symbol of the eternal love of a married couple, and candy is a symbol of pleasure. And therefore, with wishes for a long sweet life together, for your wedding, in addition to a bouquet of sweets, you can give homemade swans.

In this article we will look in detail at how you can make wedding swans from candy.

Master class: candy swans

We will need:

• penoplex - two pieces measuring 5-6 cm;
• metal-plastic pipe 50 cm long – 2 pcs.;
• Styrofoam;
• white satin ribbon;
• padding polyester or thin foam rubber;
• corrugated paper and ribbons;
• toothpicks;
• white organza or tulle;
• colorless varnish and glue;
• scissors, sandpaper (fine), stationery knife, paints;
• candies (it is better to choose candies with a white wrapper with small colored elements).

Progress:

1. We cut out the head of the future swan from a piece of polystyrene foam.
2. We make a rounded shape for the swan's head, using a utility knife to remove all unnecessary angularities.
3. Take fine sandpaper and sand it.
4. We paint the sanded head of the swan white, and the beak orange or red. You can draw eyes or glue black beads.
5. To make the neck, we take a metal-plastic pipe. We bend it so that one bend is smooth, and the second is steeper. To obtain a smooth bend, it is better to use a round pipe or any other object.
6. To attach the neck, we make a small hole in the swan's head. Coat the end of the neck with glue and insert it into the hole. We proceed to the next stage only after the glue has completely dried.
7. We cut the padding polyester 50 cm long and a width equal to the circumference of the pipe. We wrap it around the entire pipe, gluing the padding polyester with glue.
8. We cut out two bodies from foam plastic for our wedding swans.
9. In the body, to attach the second end of the neck, we make a small hole and, using glue, attach the neck to the body.
10. We wrap the neck with a white satin ribbon, but when wrapping it, you cannot tighten the ribbon too much and you must make sure that there are no gaps. For reliability, we fix the tape with glue in several places.
11. To decorate the swan's body, we make pounders (inserts on toothpicks) from organza, tulle or white mesh, and glue a toothpick to each candy for fastening.
12. We insert candies and pounds into the body, alternating with each other. The more you insert, the more magnificent the swan will be.
13. We make the second swan in the same way.
14. To create the image of the bride and groom, we make a veil for one, and a black top hat for the other.
15. We cut out a heart from foam plastic, such a size that both swans can fit on it. We wrap it in corrugated paper, decorate it with ribbon and secure it at the bottom. Place the finished swans on top.

Our pair of wedding candy swans is ready!

Using your imagination, you can decorate a pair of these sweet swans in different ways.

For the holiday, candies can also be decorated in the form of a bouquet or heart.

Related articles:

womanadvice.ru

DIY swan. Schemes, ideas and master classes

Swans are graceful birds, so attractive that many craftswomen, in one way or another, try to embody their image in their work.

And a pair of swans is firmly associated in our minds with a pair of newlyweds, and this symbol is also actively used by needlewomen.

In general, we can’t escape the swans with our own hands! And this is pleasant, because their beauty and grace are always pleasing to the eye. On our website we collect various ideas and projects. lessons related to making swans with your own hands. You can find all our finds using the tag DIY swan, crocheted swan, and also using the search query swan.

Basket in the form of a wedding swan

A hand-made wedding white swan in the form of a gift basket is another additional gift that will be remembered by the newlyweds and everyone present. To make such a product you will need:

• durable industrial cardboard;
• wire;
• rope;
• ribbon, guipure, fabric;
• glue.

DIY wedding swans

Do-it-yourself wedding swans are made according to a certain principle:

1. A round or oval base is cut out of cardboard. For the sides of the basket you need to cut 2 strips: 6 and 10 cm high. The smaller strip is glued to the base; after it dries, the second one needs to be glued on top.
2. The base and seams are carefully taped with white paper.
3. The head, neck, wings and tail of a swan are formed from wire.
4. Using twisted rope, volume is added to the frame.
5. The final shape, color and volume are determined by ribbons.

All parts are fastened together with wire. The basket is decorated using fabrics. The wings and tail of a swan can be decorated with guipure. Paste it around the edge of the parts or overlap.

To make the seams less noticeable, you can cover them with corrugated paper.

LiveInternetLiveInternet

—Categories

• POETRY (5033)
• MUSIC (2956)
• COOKING (2313)
• HANDCRAFTS (1110)
• SALADS (935)
• BAKERY (931)
• AUTUMN - FOR THE SOUL (883)
• VIDEO CLIPS (800)
• SOUL DROPS (749)
• HUMOR (675)
• TIPS (603)
• PAINTING (572)
• HEALTH (549)
• BLANKS (514)
• EVERYTHING INTERESTING (482)
• DESIGN (409)
• FLOWERS (372)
• HOLIDAYS (321)
• STORIES AND PARABLES (233)
• NATURE-SEASONS (227)
• FILM LIBRARY (223)
• CHAMOMILES - MY FAVORITE FLOWERS (214)
• STILL LIFE (209)
• DANCE RUBRIC (195)
• FAVORITE ANIMALS (181)
• BEAUTY (165)
• MY Cottage (145)
• SITE CATALOG (132)
• CHILDREN'S RUBRIC (128)
• GAMES (108)
• PAINTING (106)
• INTERESTING PEOPLE (95)
• NEW YEAR (87)
• ALL ABOUT ROOM FLOWERS. (81)
• ONLINE MAGAZINES (78)
• MARINE RUBRIC (68)
• FASHION (61)
• MY FAVORITE PLAYCASTS (51)
• SO NATIVE VLADIVOSTOK (49)
• ANGELS (46)
• OLYMPICS.SOCHI 2014 (28)
• AUDIOBOOKS (28)
• TALES (27)
• WATCH (24)
• CITIES OF RUSSIA (20)
• WORLD OF FANTASY (19)
• ENCYCLOPEDIA (18)
• MULTICOOKER. RECIPES. (15)
• ANIMATION (15)
• TOASTS (14)
• VIRTUAL FRIEND (11)
• MY PHOTOS (7)
• FIGURE SKATING (7)
• OCEANARIUM (7)
• MY WORKS (6)
• MY COLLAGES (1)
• (0)

—Quote book

I fell madly in love with October.

So it was October 3rd for us! 1. 2. 3. 4. 5. 6. .

And outside our window, daisies run into the cedar forests. .

What does a woman want in winter? What does a woman want in winter? Feel the warmth of a man, cling to.

-Music

—Links

—Applications

• Postcards
  Reborn catalog of postcards for all occasions
• Music player
• I am a photographer
  Plugin for publishing photos in the user's diary. Minimum system requirements: Internet Explorer 6, Fire Fox 1.5, Opera 9.5, Safari 3.1.1 with JavaScript enabled. Maybe it will work
• Wall Wall
  : mini-guest book, allows visitors to your diary to leave messages for you. In order for messages to appear on your profile, you need to go to your wall and click the “Update” button
• Cheap flights
  Favorable prices, easy search, no commission, 24 hours. Book now - pay later!

—Photo album

—Tags

-Summary