Cars of guests at a wedding: how to choose and decorate a car, limousine, bus or minivan, how to rent the right vehicle for transportation, decor ideas (photos)

Wedding car decoration photo

We collect wedding decor for cars

So, the decoration is ready, you just need to attach it to the hood to enjoy an exciting ride, an incredibly fun event, to which the handles are also related.

However, these are not all the moments, and you should decorate the motorcade’s car, which requires stylish decoration of the car handles to give them beauty and special chic.

DIY wedding rings for a car, ideas

Option 1

Material:

Plastic pipe
Artificial flowers
Foam plate
Golden ribbons (golden decorative tape) or fabric
Satin ribbons
Thread, needle, scissors
Glue
Scotch
Base fabric

Progress:

Cut the corrugated pipe hose into two parts. Make two rings by securing the pipe sections with tape.
Wrap the surface with tape to remove any unevenness from the surface.
Decorate the top with golden decorative tape or golden ribbon. In the absence of tape, golden fabric will do.
Secure the rings together with tape. Place it on a foam pedestal by making small holes in it and stringing ribbons through them.
Cover the foam stand with a beautiful fabric and sew it.
Stretch wide satin ribbons under the foam and rings, tie them in the place where they are fastened to the foam. With the help of these tapes the structure will be secured to the car.
Decorate the rings with flowers and other decorations. Cut the stems of the flowers and insert them into foam. Secure with a glue gun to prevent the flowers from being blown away by the wind.
You can insert neodymium magnets into the foam for a more durable attachment to the car.

Option 2

Take the wire, cover it with paper, which is secured with tape (for volume).
Cover the top with shiny golden fabric and attach it to a frame made of foam rubber or polystyrene foam.
To secure it to the car, attach tapes to the frame.

How to decorate a minibus for a wedding?

Just like choosing a wedding decoration for the bride, decorating wedding cars requires special attention and creativity. In order to properly decorate wedding cars, you first need to correctly compose the wedding cortege.

When distributing cars in a wedding cortege, you need to follow several rules.

Do not assemble a wedding cortege from a large number of cars. Limit yourself to three cars.
It is advisable to order cars of the same color or tone.
The groom's limousine should be the first in the wedding cortege.
A wedding minibus for guests should be placed behind the limousines.

Under no circumstances park the minibus at the end of the column. A minibus is not a sports car and it will be difficult for a minibus driver to keep up with cars and limousines. At the very end of the wedding procession, there should be bright cars that differ from the main color of your wedding procession.

Decorating cars correctly

Nothing could be simpler. Decorating a wedding car does not require a higher education diploma or any special knowledge. You should not order wedding cars rented half an hour earlier in order to decorate them.

You will spend a maximum of five minutes of your precious time on decorating one car if you think in advance about how you will decorate the wedding cars and prepare all the wedding decorations in advance. You will definitely need scissors or a utility knife.

If you have ordered several wedding cars, ask your guests to help you. Divide into several groups and decorate all the cars at the same time. You can even arrange a competition to see who can dress up a wedding car the fastest and most effectively.

If something doesn't work out for you or you can't attach the wedding decorations correctly, ask the driver of the wedding car for help. The driver of the rented vehicle is an experienced person and has decorated cars at weddings more than once.

The difference between minibus decorations

Decorating a minibus for a wedding is no different from decorating wedding cars and limousines.

Order a minibus for a wedding

Application Form

Where to get decorations for a wedding car?

Ready-made wedding decorations and entire sets for decorating wedding cars can be purchased in specialized stores. If you are a creative person and have a little free time, you can make your own wedding decorations at home.

In order to make wedding decorations with your own hands, you will need material and special tools:

glue gun;
stapler;
scotch;
stationery knife;
scissors;
glue.

For everyone else, there is a huge amount of ready-made wedding decorations on sale, made in China, which can decorate any wedding car and wedding procession. Twenty years ago such abundance could not have been dreamed of.

The only decoration for a wedding car in the Soviet Union were dolls on the radiator grill and copper rings with bells on the roof of the car. Copper rings for the roof of a car were made by craftsmen at the factory, in exchange for a bottle of vodka.

Such rings were attached to the roof of the car using two ribbons on both sides. Correct copper rings with real copper bells made a small chime when the wedding car moved.

Currently, all wedding decorations can be divided into two parts: artificial and living. All artificial and live wedding decorations for cars and fastenings for them are made disposable. Such decorations can only be used once.

After a wedding walk around the city, wind-worn decorations, stained with dirt and road dust, take on an unaesthetic appearance. You still have to throw them in the trash can. So think again before purchasing live car decorations. Of course, decorations made from fresh flowers look luxurious and impressive, but the prices for such wedding decorations are steep.

Do not forget that all decorations must be in harmony with the body color of the wedding car. Light-colored cars are decorated with bright decorations, and dark-colored cars are decorated with light decorations. To avoid bad taste, the decorations themselves should be combined in color.

The most common color combinations:

Pink - raspberry - red.
Light blue - blue - pink.
Blue - red - yellow.

The wedding car is usually decorated with:

roof;
hood;
radiator grille;
door handles;
rear view mirrors.

Be sure to decorate the roof of the first wedding car in the cortege, with wedding rings or two hearts, framed by a flower arrangement, this will emphasize the solemnity of your event and will attract the eyes of passers-by and drivers.

Don’t forget that rings on the roof of a wedding car are not a deputy’s flashing light, and do not give you an advantage on the road over other road users. But there are still polite drivers who, blinking their headlights, always let the wedding procession pass.

Decorations are attached to the roof using ribbons or a magnet. Securely attach the decoration to the roof of the car and do not exceed the speed of more than 50 km/h so that your composition does not get blown away by the wind while driving.

The hood of a wedding car or minibus can be decorated with multi-colored nylon ribbons, a floral arrangement or a fabric cape made of tulle or chiffon.

When decorating the hood of a car or minibus, be careful, the engine must be turned off, make sure not to touch the car’s mechanisms under the hood, firstly, you can get dirty, and secondly, get burns from the heated parts of the engine.

Be sure to cut off the excess ends of the tapes to prevent them from getting into the rotating parts of the engine. Flower arrangements are attached to the hood of the car using suction cups, so as not to block the driver’s view.

You can decorate the radiator grill of your car with a flower arrangement in the form of two hearts or rings. The decorations are attached to the radiator grill using ribbons. Do not tighten the jewelry fastening tapes with great force so that they can be easily removed at the end of the wedding walk.

Before attaching your wedding decorations, make sure your car's grille is secure. Decorations should be attached with extreme caution so as not to damage body parts. Some wedding cars have radiator grilles that are not cheap.

In the summer, in order to avoid engine overheating and disruption of the air conditioning system, it is not recommended to cover the entire radiator grill with a large bouquet; be sure to leave free space for air to enter the engine compartment, to the engine cooling system.

The door handles and mirrors of the wedding car can be decorated with ribbons. When tying wedding ribbons to the door handles of the minibus, make sure that the ribbons do not block the mechanism for opening and closing the doors and emergency exits of the minibus. It is not recommended to decorate mirrors and car handles with balloons.

To avoid unpleasant interactions with police officers, it is not recommended to decorate car license plates. By covering license plates with stickers, you are violating traffic laws, especially since some stickers come off along with the license plates. Residues of glue from the license plate can only be washed off with a solvent.

All wedding decorations must be securely fastened, not block the driver’s view, including rear-view mirrors, and not damage the body of the rented car or minibus.

Dress up your car for a wedding in moderation; you should not overdo it with wedding decorations so that your motorcade does not look funny. A tastefully decorated wedding procession will once again emphasize the significance of your event and will not go unnoticed on the city streets.

busru.ru

How to decorate a wedding car, ideas with photos

Butterflies on suction cups

Make butterflies from cardboard or other material (you can use a plastic bottle) using a template or using the origami technique.
Attach a suction cup to them so that you can attach them to your car.

Hats

Material:

Whatman paper – 3 sheets
PVA glue
Glue gun
Fabric for hats
White tape – 3 meters
Cardboard
Newspaper
Thick ribbon

Progress:

Cut out two circles from whatman paper, 37 and 26 cm in diameter, leaving a margin for fastening. Fasten the two remaining pieces of whatman paper together in the shape of a tube using a glue gun. Attach the circles that will be the top and bottom of the hat.
Dilute PVA glue with water, tear finely newspaper. Soak it in the solution and stick it on the base, using the papier-mâché principle. Let it dry for a day.
Sew a cover from the fabric, cutting out a circle 28 cm in diameter, then two strips, one 12 cm wide and 1.5 m long, the second according to the shape of our base, allowing a little allowance for the seams. Sew the main part first, then add the circle. Carefully stitch around the edges of the circle.
Attach the cover to the base with glue.
Decorate the hat with ribbons.
Attach special magnets or suction cups to the hat to prevent it from falling off the car.

Bow

Take tulle (a large amount), tie it randomly to make a large bow. Can be tied with ribbon. Decorate to your taste.
Tape it to the car.

DIY paper heart

You can ask your closest friends and relatives for help. In this case, the process of making jewelry will go much faster. You can also entrust this important task to a professional who will take care of the appearance of your jewelry. Not every person, by the way, will be able to make a beautiful heart using the quilling technique if he does not have such experience.

Do you think it’s impossible to make such a decoration with your own hands? So, it’s worth thinking about making voluminous paper hearts. To make such a decoration, you need to prepare:

red sheets of paper;
a simple pencil;
paper glue;
tape (preferably double-sided);
scissors.

At the very beginning, take cardboard and cut out heart-shaped templates from it. Their size should be different. Using the templates, draw hearts on the prepared sheets. Cut out the hearts and make small cuts strictly in the center of the blanks. The edges that appear at the cut site need to be folded back. Then turn the flat decoration into a voluminous one by gluing the edges of the heart together. Turn the hearts over to the other side and attach with tape. Decorate your walls with your hearts. If you don’t have enough imagination to decorate the festive hall, then you should use the services of a professional. He will do everything the right way. You will be satisfied with the result of the work.

Decorating a wedding car with flowers, ideas with explanation

Flowers on suction cups

Purchase artificial flowers from the store and trim the stems if necessary.
Attach suction cups or special magnets to the flowers to secure them to the car.

flower composition

Material:

Master class on decorating a car for a wedding using tulle with your own hands

Tulle is quite often used as decoration for wedding cars - it is a relatively inexpensive fabric, and it also looks chic as part of the wedding decor.

As a rule, the fabric is most often used as hood or roof decor.

Decorating the hood of a car with tulle is done very simply - the fabric of the desired color is stretched diagonally from the windshield to the bottom of the hood so that it expands from below. The lower part of the fabric slams shut with the hood, the upper corner can be attached with an elastic band to the side glass or secured with double-sided tape. The fabric alone will not look complete, so it needs to be supplemented with flowers or balloons. Another decorative option is two strips of tulle, stretching from different sides of the car to the center of the hood.

Photo of DIY car decoration for a wedding made of tulle

In this case, double-sided tape or rubber bands will again help. Strips of tulle can be tied with ribbons at equal distances from each other or decorated with flowers .

Wedding car decoration with ribbons, ideas with photos

Ribbon and flowers

Buy tape that is twice the length of the hood and 5 cm wide.
Pull it through the radiator grille in a V shape and secure it under the hood with a clothesline or tape.
Sew artificial flowers onto the ribbon. You can make flowers or bows from organza yourself.
Tie pieces of ribbon between the flowers so that they flutter as you travel.

Lush ribbon

Sew an elastic band to the ribbon and gather it a little so that the ribbon becomes an “accordion” for pomp.
Attach to the hood, adding another decorative element (balls, stickers).

Heart made of paper napkins on ribbons

From cardboard, cut out a blank - a heart, as well as a 6 cm strip. Bend the strip in half.
Cut the cardboard on one side of the fold with scissors and attach this strip to the heart with tape.
Take a folded napkin and cut out a circle. Use a stapler to secure the middle.
Straighten each layer of the napkin with your fingers to form a flower.
Attach the roses to the base with glue, secure the base with two ribbons.

Automotive design with your own hands or carefully, Just married!

The tradition of elegantly decorating the cars of a wedding cortege in the last decade has become replete with a variety of forms, going beyond the usual ribbons on the hood of a snow-white Volga.

Like other wedding customs that originate in Ancient Rus', the process of decorating the wedding train, which consisted of 6-7 horses, whose manes were decorated with ribbons and their arches with bells, successfully evolved.

Modern fashion and technology create trends that, when implemented, will make your special day shine as a bright star in the crowd of capital streets.

All cars forming the wedding procession must be beautifully decorated. Most often, cars are decorated with multi-colored balls, bows, paper and satin ribbons. Most often, nylon, paper, patterned or brocade ribbons are used.

Ribbons give the car an elegant look, however, they need to be combined in color to prevent it from looking tacky and tasteless. It is better to select ribbons based on contrast: light cars decorated with bright ribbons look more elegant, and dark cars decorated with light ribbons look more noble.

The most successful color combinations will be:

raspberry - pink - red;
three shades of pink;
blue - pink - blue;
blue - yellow - red.

Words on glass

One of the most popular types of car decoration for the bride and groom. Imagine a huge inscription “We are married!” emblazoned on the rear view glass. In fact, this inscription is just a thin film that can be easily peeled off without leaving marks on the glass or body surface.

An excellent alternative to “Velcro words” is a washable marker for a car, armed with which your family and friends will be able to create real masterpieces of automotive design.

Signs and posters

The easiest way to highlight the main car of the motorcade is to attach a “Justmarried” sign entwined with colored ribbons to the trunk or hood. One guy distinguished himself at his brother's wedding by writing, "Hooked" on a piece of paper.

Show your imagination

Give free rein to your imagination and create your own unique sign in accordance with the style of the celebration - for example, decorating the wedding car with fluffy white pom-poms in winter, red maple leaves in autumn, mischievous daisies in summer.

Ordering minibuses for a wedding with a driver is inexpensive

Minibus for rent with driver for a wedding

Color of love

Flowers are without a doubt the most beautiful way to decorate wedding cars. How impressive two connected hearts of white and red roses look. Small boutonnieres will perfectly decorate side mirrors and last all day.

Garlands of greenery and roses will look beautiful on the roof of the car. Of course, it is better to entrust the decoration of the wedding cortege cars to a specialist - a phytodesigner, who will take care of the freshness of the flowers for the whole day.

Useful tips

To make the ribbons on your car look even more beautiful, you can sew hand-made satin roses on them. Roses should be of a contrasting color to stand out better against the background of the ribbons. To make a decorative rose, take a ribbon of medium width and about 1 meter long, leave 15 cm of the ribbon hanging freely from the palm, wrap the rest around the palm (right side out) until there is a free piece of 20 cm left.

Pass this remainder of the ribbon through the wound rings and tie it with a knot to the other remaining end. These ends will help secure the roses to the ribbons. You can place any number of roses on each ribbon.

Ribbons decorate the hood and trunk of a car, as well as radio antennas. The easiest way to attach the tape to the surface of the machine is with wide tape. Be sure to check if it holds well.

You can purchase ribbons at a wedding salon, store or market. Or you can easily make it yourself using an elastic thread and a sewing machine. Make the ribbons up to 15 cm wide. The nylon ribbon can be gathered in 2-3 layers - this way it will be more magnificent.

The length of the tape before gathering should be 4-5 times the length of the finished tape. Measure the length of your car with a tape measure, starting from the center of the radiator grille (where the tape is supposed to be attached), across the sides of the roof, to where the tapes are attached at the rear. There will be two such tapes - on both sides of the machine.

That is, the finished length of your tape is equal to two machine lengths. We make the assembly in the middle of the tape, laying a line with an elastic thread. The elastic thread is always wound onto a bobbin, most often by hand. At the top, insert a regular strong thread to match the ribbon. The thread tension needs to be loosened.

Make 2 lines. Each time the tape will collect more. Assemble it so that when finished it is 5-10 cm shorter than the required length, so that when decorating the car, stretch it slightly. You can sew small artificial flowers onto the ribbon. Instead of flowers, you can sew bows from any thin fabric of your choice.

The cars in which guests will travel are decorated with only two or three rows of ribbons of different colors towards the car windows. You can attach balloons to the antenna.

In general, decorating a wedding cortege is a matter of your imagination, the main thing is that the cars look festive, so that at the first glance it becomes clear to everyone that this is a wedding cortege. Of course, when decorating a car it is not at all necessary to use the services of a designer, but at the same time it is better to use the person whose taste you can rely on.

You can entrust car decoration to friends and relatives; you don’t have to do it all yourself. But in order not to ruin your mood by going to the registry office in a car that is not decorated at all the way you would like, it is best to discuss with your friends all the ways to decorate cars and prepare the necessary materials in advance.

baby.ru

Car hood decorations, ideas with photos

Fatin. Tie two colors of tulle at the base. Pass it down one side of the door and secure it under the hood.
Wedding stickers. You can apply special vinyl stickers with a wedding theme. Instead of stickers, use colored tape from which you can cut out various shapes.
Toys. Stretch the ribbon or tulle, securing it well under the hood. Sew soft toys to the material.

Interesting ideas

How and with what to decorate a wedding car is only a matter of your imagination and your skill. At the same time, it is not at all necessary to spend a lot of money on decor. The car of the bride and groom looks very cute and attractive, decorated with playful sunflowers framed by green branches and a regular floral mesh. The hood is impressive, on which two hearts and the inscription “LOVE” are laid out from white daisies and red gerberas. And the huge rose made of tulle and organza on the radiator of the wedding car will certainly make all the guests gasp and passers-by look around.

For a themed wedding, you can decorate cars and buses with any items that correspond to your intended idea, these could be:

And one last piece of advice: don’t forget that the car will also be in the frame in many photos, so don’t neglect its decoration. If you want everything to be flawless and beautiful, then spare no time and effort on high-quality car decoration. If you feel that you can’t cope, don’t skimp and turn to specialists.

Source

Decorations for wedding car handles, ideas with photos

Air balloons. Please note that the balloons should not block the driver's view, so choose small balloons and do not hang them on long ribbons.
Bow. Tie a tulle in the middle, tie or sew on a flower for decoration. Add ribbon to tie the bow to the handle.
Boutonniere. Form a circle from a piece of batting, basting in the middle. Sew an artificial flower according to class=”aligncenter” width=”950″ height=”634″[/img]

Decoration of car handles in a wedding procession

Doors are usually decorated with boutonnieres , but you can decorate the handles with bows or ribbons. Bows can be made by analogy with large bows, only using a piece of fabric of the appropriate size.

Photos of decorations for the wedding procession

If the wedding is planned in the warm season, then you can use fresh flowers in the decor. But you need to keep in mind that such decorations are short-lived. Therefore, artificial flowers are also quite suitable for decoration.

A video on how to make a decoration for a car for a wedding with your own hands can be viewed at the link:

Decorations for wedding car mirrors, photo

Boutonniere. Attach ribbons to the flower and tie them to the mirror.
Tulle bow. Fold the tulle into a rectangle and tie it with a ribbon in the middle. Sew artificial flowers to the ribbon.
Bouquet of flowers. Make a small bouquet of artificial flowers, wrap it in fabric and tie it with a ribbon.

Ribbons

In our country, they traditionally use ribbons, pulling them over the hood, but you can do it differently. Tie ribbons to your side mirrors or trunk and attach artificial flowers to them.

Pinterest/ Ashley Ludaescher

You've probably seen Hollywood films where newlyweds leave a wedding to the sound of tin cans dragging behind the car. Why not repeat it, because this is an easy way to decorate a car for a wedding with your own hands. Only the jars should be clean and preferably the same color (you can paint them).

Polina Vinogradova/ Elina Upmane Photography

Bright colored pom poms tied to a car look cool! You can also choose those that match the color scheme of the celebration.

Decorate your car with fresh flowers, it always looks great. If you have a budget, ask the florist to make a composition for the newlyweds’ car, then the car will become one of the places for a photo shoot. Make sure the flower designs are well attached and will not fall off while riding.

Sarah Jane Ethan Photography

If you know how to draw or have good handwriting, you can decorate your car for a wedding with a beautiful inscription on the rear window. It's inexpensive and looks unusual so far.

This type of decorative element is common for children’s parties, but flags in the wedding colors will be an interesting decoration for a car. On the websites etsy.com or livemaster.ru you can find similar elements in a variety of colors.

Lindsay Madden/Fanny Combes

Similar to flags in essence, but look different. We advise you to pay attention to such paper garlands if your budget is limited, but you still want to make your car festive.

An unusual way to decorate a car for a wedding with your own hands is to install an installation of gift boxes on the roof. The help of a professional is optional; after training, you will pack the “gifts” in such a way that the result will be indistinguishable from the work of a decorator.

Young people often decorate their car with balloons for their wedding, but we want to offer an unusual way. Instead of hanging clusters of balloons on your car, choose large colorful balloons and let them hang out of the windows to attract attention.

Orange Turtle Photography

Think about the idea of a celebration, maybe the options suggested above don’t suit you, but can you come up with new ones? Just like these couples:

Wild Whim Design + Photography/ Marie Clairemagazine

Source

How to attach decorations to a wedding car

On the roof. Attach massive jewelry to suction cups and ribbons. Tie the ribbons under the roof of the car; they are also held by the side axles of the doors. Attach the decoration to additional ribbons, which should be attached under the hood of the car. There should be suction cups on the bottom of the decoration for stability.
Decorations on mirrors. Secure with elastic bands or ties. Decorations should not cover the mirrors so as not to interfere with the driver's view.
Radiator decorations. Tied with ties.
On the rear window. Attached with suction cups.
Hood nets and tapes. They are secured with special tapes running under the hood.
Small, lightweight decorations on the hood (flowers, butterflies) are attached using special neodymium magnets or suction cups.

How to attach tape to a car - simple ways

In addition, to select or create decorations, you also need to attach them to the machine.
This is a very important stage in preparing the wedding procession, because all the decor must be securely installed. If this is not done, the most harmless thing that can happen is that it will simply fall on the road. But even this case with volumetric figures can be dangerous. Newlyweds need to be more careful with ribbons or fabric, because a piece of fabric flying from the car can land on the windshield behind a moving car, which can cause loss of control and an accident.

How to attach the tapes:

The easiest way is to attach small ribbons to the mirrors or handles of the car; you can also decorate the rear windshield wiper with them. It is enough just to tie them tightly, or for greater reliability, fasten them with a stapler. This is especially true when the ribbons are holding another decorative element.
The second most difficult thing is attaching the strips to the hood. To do this, you just need to lift the cover and secure the ends of the tape next to the windshield. If there are protrusions on the inside and the ability to secure an elastic band, then this is done immediately without closing the lid. If not, then the ribbon is threaded through the radiator grille and tied tightly; it is important to cut off or hide the ends under the decor so that they do not spoil the appearance.
If the tape is light and is passed over a large area of the car, so that it does not drift away, both ends are firmly fixed. When one of the ends needs to be left free, strips of double-sided tape are used along the entire length of the tape.

Before using any of the methods, you need to make sure that pieces of fabric do not fall into moving or heating parts of the car. If you are going to use adhesive tape, then you need to check in an inconspicuous place how it is cleaned and whether it leaves stains on the paint.

Interesting examples

In order for the wedding to go well, you need to prepare everything in advance and think through every moment in its organization.

Decorating the car will be no less important detail than all other stages. To beautifully dress up the bride and groom's car, you need to know at least the basics of decorating vehicles for such events

Finding inspiration from various photos and websites, you can create your own, unique look for the wedding procession, which will remain in the memory of the newlyweds and all guests for many years to come.

The most preferred color for a wedding car is white, as it symbolizes purity, with which the new life of two lovers who decide to unite themselves in marriage should begin. The decor of such a car can be very diverse, but contrasting colors look best, for example, red and white, which complement all elements of the car.

It is important not to overdo it and use the right combination of red and white shades. An excellent addition in this case would be flowers, which may be different in appearance, but in one color scheme to match the entire design.

Tulle on the hood and handles, complemented by a bouquet and boutonnieres, will be a simple but very effective option for decorating the newlyweds’ car.

In addition to the traditional tulle and flowers, toys symbolizing the bride and groom can be installed on the roof, and additions to them can be installed on the hood. For example, if a hare and a hare with carrots are placed on top, then toy carrots can also be attached to the hood. This decoration will delight newlyweds with a good sense of humor and those who want to stand out from the crowd.

Of course, decorating a white car exclusively with flowers will look chic. The presence of a large bouquet, which will be located in front, on the radiator grille, and small boutonnieres of the same color, located along the hood, will become a modest, but very stylish decor. This option looks especially good on large and expensive cars, which in themselves are already the “highlight” of the event, and with a little addition they become the real center of the holiday.

You can also come up with a number of decorations for a black car that will look great, creating an amazing holiday for the young people and giving them a great mood. It is best to use light decor for dark vehicles. For example, white tulle looks amazing against a black background. You can decorate the salon doors in a very original way, for which tulle is stretched from top to bottom and tied in the center with a bow, decorated with a boutonniere of the same flowers as on the hood. The presence of contrasting shades creates an amazing effect, and a black car that would seem unsuitable for a wedding becomes surprisingly beautiful.

Adherents of a laconic style in decorating a car for a wedding will like the option that requires the presence of two hearts of a white or light shade, symbolizing the love of the bride and groom, flowers of a similar color scheme located inside the hearts, and a hat of the bride or groom if the cars are different. You can also use two accessories together.

If the newlyweds have a whole limousine at their disposal, then its decor should also be approached responsibly. Since the machine itself is very large, there is no point in overloading it with additional accessories. Typically, wedding cars of this size are white, so you can decorate them with flowers of darker shades. Red, pink and beige roses, complemented with green petals, will look very impressive. For a more stylish appearance, you should add satin ribbons to match the flowers.

Not everyone likes modesty, especially on the occasion of a wedding, so even a limousine is decorated on a grand scale. The presence of voluminous flowers in bright shades on a long white car can be complemented by a scattering of hearts glued to the hood and side of the car

When decorating like this, it is important to maintain consistency in the color palette so that the flowers and hearts are the same color, such as red, white or pink. Externally, the car will look too colorful, but not a single one of those who sees it will remain indifferent

You can decorate a wedding cortege in different ways - the decor will depend on many factors, but the most important thing will be the desire of the young couple to be together, to love and protect each other and to live happily ever after for many years.

Step-by-step instructions for creating car decor for a wedding yourself

Initially, you need to create the main decor for the car hood in order to be guided by it in the future.

Simply put, all decorations must certainly be created in the same style, because in this matter no bad taste is inappropriate.

Recommendations for choosing the necessary materials

It is important to take into account the huge number of small elements that can completely ruin a good impression. To prevent this from happening, we recommend listening to simple recommendations from those who once made mistakes and no longer want to repeat them.

There are a minimum of such tips, but following them, registering a car for a wedding event with your own hands will become a fairly simple matter.

It is also very important to understand that the decor of a car for a wedding event should have a single shade. It is not recommended to use more than several tones at the same time.

Source

Master Class

To make the hat on the roof of the car from the wedding cortege look touching, gentle and solemn, it is made of considerable size. After all, such decoration should attract the attention of others and make the car inimitable. To make a cylinder hat you will need:

Work begins with drawing up a pattern drawing. First of all, you need to draw several circles on the cardboard.

Large ones (approximately 40–50 cm in diameter) will play the role of the base and brim of the hat.

A couple more circles will be needed to make the bottom of the cap. A hole is cut out in the middle of one of them, the diameter of which corresponds to the diameter of the small circle.

Now you can draw a rectangle, one side of which in its length corresponds to the circumference of the small circle (bottom), and the second to the height of the product. After the rectangle is cut out, you will need to make cuts at least 2 cm deep on its two sides at the points of attachment to the bottom and margins.

The strips are bent in different directions. The upper ones bend inward, and the lower ones bend outward. A rectangle of whatman paper or cardboard is wrapped around any base to form an even cylinder, and the edges are secured with a stapler or tape. One small circle is placed inside the finished paper cylinder and strips bent inward are fixed on its surface.

For this it is better to use a stapler. This will make the mount stronger.

Now it's time to create the base (brim) of the hat. To do this, you will need to glue the strips of the notched edge to the part with the hole so that they all remain under the ring and are not visible from above. The surface of the solid circle is treated with glue and the prepared structure is carefully applied, aligning the edges.

Holes are made in the brim of the cap along the entire circumference, which will be used to install magnets.

For quick and strong gluing, weights can be placed on the margins of the workpiece and left in this state for at least several hours.

During this time, you need to make a pattern from the fabric prepared for creating the cover. The men's top hat is covered with black silk, and the women's top hat is covered with white silk. You need to sew a cover from a rectangle and a small circle so that the height of the cylinder exceeds the size of the workpiece by a couple of centimeters. This also applies to the two remaining circles. The finished cover is placed on the workpiece.