Pedicure machine with blade: how to use

Description of the tool

Considering that visually a pedicure tool is similar to a regular shaving machine, there is nothing in common between them and their functions are different. Pedicure machines are purchased to take care of your feet. Professionals call this process a trim pedicure. It is not suitable for people with diabetes.

For a high-quality medical pedicure, it is better to contact a specialist in this matter; it is not advisable to do it yourself. The machine consists of:

Sharp blades (gets rid of seals and calluses).
Sanding files.
The tool itself.

Unlike shaving machines, pedicure machines do not function like razors. It contains very sharp blades, so they need to carry out the procedure carefully and carefully. If you remove rough skin using a razor, this sometimes has a negative effect on your feet. The razor will leave deep cuts, resulting in infection and an inflammatory reaction. There is a possibility that a pedicure machine will damage your foot due to its sharp blade, so it is important to use the razor correctly.

Before you start trimming your skin with a pedicure machine, it is recommended to consult a dermatologist. It will reveal the presence of all kinds of foot lesions. To prevent the heels from becoming rougher, you need to use the machine over a long period of time. For a painless shave, before the procedure, the legs are steamed in hot water, due to this the skin will soften and it will be easier for the blade to capture only the roughest part. You can do it 3 or 4 times a month, then your feet will always be protected from damage and the likelihood of complications will decrease.

This manipulation should not be performed on people with deeply cracked feet because cutting off the dead, rough skin will damage the top layer of skin. If this fact is not scary and you still plan to treat your heels using a machine, keep in mind that in such a situation a superficial procedure is carried out with the application of special septic tanks. The movement of the blade comes from the place where the rough skin begins. Under no circumstances should you act from the middle of the heel.

When treating fingers, it is taken into account that calluses often form in the area of the thumb and little finger, so treatments are limited only to them. To finally get rid of dead cells, use the heel grinder, which is included in the kit.

Before buying a machine, you need to carefully study it and make sure that the blades are sharp, since dull ones will lead to negative consequences.

Preparing feet for pedicure

Before removing rough skin, take baths to soften your heels.

There are a lot of recipes for heel baths.

For example, you can use a mixture of hot water, olive oil, sea salt and milk as a bath.
Fruit oils mixed with hot water will also steam your feet well. The water temperature should be hot, but at the same time comfortable for the feet.
Baking soda will soften the skin of your heels. You need to add a couple of tablespoons of soda to hot water. And let your heels rest for 40-45 minutes in this water.
A regular scrub from the store will steam your feet just as well. You should rub it into your feet with a heel brush for 10 minutes. This will also begin to help remove dead skin from your leg, meaning you won't have to work with the blade for as long. Only then should you use the blade.

Do not force yourself when using the machine; after you complete this procedure, lubricate the heels with cream.

Positive and negative sides

There are advantages and disadvantages to a trim pedicure, so before starting the procedure it is recommended to learn in detail about the possible consequences. Its positive aspects include:

Great results in a short period of time.
Removing a large layer of rough skin.
Safety and minimal risk of injury.
Long lasting effect after the procedure.
Minimal time costs.
Affordable cost of the machine.

However, the procedure also has disadvantages. But if you follow the rules, their manifestation will be prevented:

Possibility of injury to the skin layer.
Infection with infections in the form of fungus and others.
If you do not steam your legs first, you will not be able to achieve the effect.
Without moisturizing the skin with cream, the manipulation needs to be repeated after a short period of time, due to intensive restoration of cellular tissue.

How to use pumice

Among the many means for cleaning feet, pumice is used. It is a porous substance of natural origin. You can use pumice to clean your heels at home. It is this that will help get rid of calluses and eliminate corns. This will make the skin soft and tender to the touch.

How to properly clean your heels with pumice? The procedure has several nuances:

Pumice should never be used on dry skin. It should be cleaned and steamed, and dried with a towel. To do this, use steam baths with sea salt, starch or plant decoction.
Pumice is used for problematic, rough and hard areas of the skin. During the procedure, a few movements are enough to notice an effective result.
Pumice should not be used for daily heel care. The main objective of the procedure is to remove rough skin. And when a positive effect is achieved, the product can only be used as a preventive measure.

The procedure ends with rinsing your feet with cool water. And obligatory application of nourishing cream to the skin.

Types of machines

Pedicures are classic (edged) and hardware. The first is characterized by the use of a scraper, and the second is a special milling cutter, which is used in beauty salons. The procedure is carried out at home using electric, roller, abrasive files, pumice or a manual machine.

Characteristics of electric machine

An electric foot scraper is used to thoroughly care for your feet. It has built-in safety blades that help painlessly remove dead skin. It is easy to use and suitable for treating heels yourself. Before carrying out the procedure with its help, it is not necessary to steam your heels; it is permissible to leave the skin of the heels in a dry state. After finishing the treatment of the feet, a rich or moisturizing cream is applied to them. This is necessary in order to fill the skin with nutrients and prevent its rapid death.

Do not use electric razors in the following cases:

For fungal infections on the feet.
For diabetes mellitus.
For deep cuts on the feet.

An electric machine can only be used to remove corns, calluses and keratinized areas of the skin. It is strictly forbidden to apply it to the soft skin of the heels or other parts of the body. Due to the use of a pedicure machine, severe irritation occurs on living areas of the skin.

It is highly recommended that you consult a professional in this matter before purchasing an electric razor. After examining the damaged area on the foot, he will determine whether this purchase makes sense or not.

Characteristics of the manual machine

The manual pedicure machine with blades is made from stainless steel, so it will last for a long period. If you use a regular pedicure scraper incorrectly, you can seriously injure yourself. But the effectiveness of cleansing problem areas of the skin with it is much greater than that of power machines. Since it can be disinfected with various means, this will reduce the possibility of bacterial infections.

How to properly do a pedicure with a razor. The machine is the only thing you need for a pedicure

For some reason, women believe that a pedicure machine with a razor is enough to make the skin on their legs velvety. In fact, this is far from the case. How to properly do a pedicure with a razor? After processing with a machine, it needs to be sanded, then treated with peeling or scrub, the skin around the nail plate should be carefully trimmed with tweezers, and the cuticle should be pushed back with a special stick. Only then will your feet acquire a healthy and well-groomed appearance. Moreover, these procedures are also necessary because they ensure uniform removal of hardened layers throughout the entire foot. After such care, nicks, pieces of skin and hangnails will not bother you.

How to do a pedicure with a blade so as not to cut yourself and achieve ideal feet? Below you will find step-by-step instructions that will completely free and clearly explain how to do it correctly.

For a blade pedicure, you will need a bowl of warm water and softener, a special machine with a blade, as well as a nail treatment kit and nail polish. Just in case, stock up on a bandage, cotton wool and hydrogen peroxide, especially if the condition of your feet leaves much to be desired and you are new to this dangerous business.

How to do a pedicure with a blade correctly? First, steam your legs. Add a softener or aromatic oil of your choice to the water and enjoy for a couple of minutes. Now take the machine and start removing strips of rough skin from your feet. You need to start with the roughest areas. Usually these are corns on the heels and pads of the fingers (big, sometimes ring and little fingers). Having dealt with them, you can polish the entire surface of the foot with a machine so that it is evenly processed. Do not get carried away so as not to cut off living areas. At the end of the procedure, the remaining skin is usually washed off the feet and treated with cream or lotion.

Recommendations before use

Before you start using a pedicure machine, please read some points. First of all, the legs are steamed immediately before the procedure. This is done using foot baths. Oils and flavorings are added to them. If there are cracks, chamomile infusion or sage is added. Also, if there are very rough areas of skin, it is recommended to soften them with special foot creams before the procedure. This will reduce the likelihood of an injury or cut and improve the final outcome.

Application procedure

How to use a pedicure machine? The procedure for treating the feet with a pedicure machine is carried out in stages. There is nothing complicated in this process, you just need to remember to be careful and sterile.

Steam your feet in a special bath for half an hour to improve the result.
Read also: Classic (edged) pedicure
The process is performed only with light and smooth movements, while the machine must be tilted.
Treat cracked heels with extreme caution. Move the pedicure machine along, so the wounds will remain in the same condition and will not increase.
Movements go from the edge to the center, and not vice versa.
If pain occurs, you need to stop the process immediately, otherwise cuts may appear.
After completing the procedure, unevenness and roughness are sanded using a file.
The feet are treated with oils and moisturizing creams.
After completing the manipulation, the legs are placed in heat. Insulated socks are suitable for this.

Don't expect great results after the first procedure, especially if your feet are in poor condition. To achieve satisfactory results, the treatment must be repeated regularly. If the process is not carried out carefully, healthy skin will be cut off, resulting in new calluses.

Reviews

Pedicure trimming machines collect the most positive reviews from customers. It makes life easier for many women and girls, allowing them to get rid of complexes and self-doubt. A pedicure machine will help you achieve beautiful and smooth feet, because this is so important for every woman.

For an overview of pedicure machines, see the following video.

To get a pedicure, you can go to a salon or treat your heels at home. Most often I choose the second, it’s calmer, easier, and safer for me. Moreover, everything you need for a quality pedicure is at hand. I make various types of peelings and softening gels myself. But you need to buy tools.

You don't need a lot of tools - several different files, nippers, scissors, and a pedicure machine or scraper from Zinger.

I once saw a master use this thing, and at the first opportunity I bought it for myself.

The machine has a plastic handle and a stainless steel head, inside of which a special blade is clamped.

The head consists of two curved plates that move apart, and a specially shaped blade is inserted between them. It is similar to men's blades, but is smaller and square in shape.

The working surface is the cutting part of the blade, which protrudes from the plates by about 2 millimeters.

A machine with a correct understanding of its purpose and skillful use is a great thing. It is designed to treat corns, cracked heels, calluses, and rough skin.

Of course, this can be done with nail files, but it will take 5 times more time. A scraper machine can quickly cut off dead epidermis. And then sand it with files.

Of course, an important condition for the accurate operation of the machine is steaming the feet in hot water (I like to do this with the addition of urea, which perfectly softens the skin). After the skin has become soft, you can begin to work with the machine, slowly cutting off the keratinization with short shaving movements, layer by layer.

In order not to harm your feet, you must remember that this machine is intended for local areas where the skin is hard, keratinized and dead. There is no need to process living epidermis with this machine!

After use, the machine is opened, the blade is removed, washed, dried, and disinfected. The scraper is stored in a dry place.

After the blade becomes dull, I take a new one. One blade, depending on the quality, is enough for 3-6 procedures. They are sold in the same place where pedicure machines are sold.

I recommend the Zinger Scraper to make foot care easier and quickly get your heels in order. It is not expensive, made of quality materials, simple and easy to use.

Causes of deterioration of heels and feet

Problems with the skin of the heels indicate a lack of vitamins. To improve the condition of the body, the dermatologist will prescribe a vitamin complex. Heels dry out due to incorrect or uncomfortable shoes. Also, many people forget that they need to moisturize their feet and do regular pedicure procedures, otherwise unpleasant moments will appear.

Do not neglect the rules of personal hygiene and it is better to minimize the wearing of synthetic tights and socks. Under such conditions, a favorable environment is created for the life of bacteria and their reproduction. Foot care procedures are carried out regularly, and it is better to replace synthetic items with natural materials.

Remember that if strange symptoms appear on your heels, it is better to immediately consult a dermatologist. He will assess the current situation and tell you the treatment plan. If there are any restrictions on the use of an electric razor, then it is better to abandon it. Do not overdo the pedicure using a regular machine, as this will damage the skin and cause inflammation.

Thanks to a thorough and careful manicure, your heels will be in a healthy condition and will not require the help of a doctor or additional treatment.

Tips and Cautions

Many people try to completely treat all their skin at once, putting too much effort into it. The result of this is injury and discomfort when walking. This is one of the main mistakes among beginners.

It must be remembered that the soles of the feet, covered with deep cracks and large growths of hardened skin, can be cleaned in several sessions, without haste or self-abuse.

Another tip for using the machine would be a reminder to timely treat the blade and other components of the tool with disinfectants. They try to remind people of this as often as possible, since the consequences of neglect lead to a visit to the doctor and long-term treatment.

Read also: The light blinks when the light is off, what to do

Contraindication to the procedure

A pedicure machine or knife are the ultimate solutions that are relevant in cases where nothing else helps. Light roughness of the skin can be easily removed with the help of special creams, pumice and other means.

Trying to treat skin that is too delicate, a person will inevitably damage it and then have difficulty moving for several days.

Instructions and recommendations

Complete removal of cracks with a pedicure machine cannot be achieved with one procedure. To obtain the desired result, only two or three sessions will help.

It is forbidden to get rid of all the rough skin the first time, as this will cause pain and injury.

When the foot care procedure is completed, the pedicure machine is disassembled, cleaned, disinfected or sterilized. The tool is assembled only after the parts have dried. This will prevent rust from appearing on the scrapers. Before each treatment, it is advisable to replace the old blade with a new one.