Why does a matte top coat get dirty?

Proper care for matte nails

Dirty matte nails can ruin even the most elegant, stylish look. In order for such a manicure to look decorative for as long as possible, the coating needs to be looked after and cleaned periodically.

How to wipe matte nails

Many fashionistas complain that the coating darkens and gets dirty just a few days after going to the nail salon. It’s not surprising, because any dirt easily clings to micro-roughness. To ensure that your nail plates always look perfect, it is recommended to degrease them periodically. As a degreaser, you can use a special product in the form of a spray.

Mistakes in caring for matte nails

To ensure that your manicure always looks fresh and aesthetically pleasing, it is necessary to limit the harmful effects of environmental factors on the coating. Many people neglect this, and as a result, matte nails quickly become dirty and take on an unaesthetic appearance. When cleaning the house, making repairs, working in the garden, or other types of work in which the nail plates may get dirty, you must wear gloves.

How to make a matte finish last?

It's no secret that a matte finish wears less than a glossy finish. Chips and minor damage are more noticeable on it. To make your favorite polish last longer on your nails:

• Apply the varnish in thin, neat layers.
• use a matte topcoat. With a matte top coat, the coverage will last a long time.
• Do not treat the cuticle with oils or other greasy products.
• Be sure to degrease your nails before applying polish.
• Seal the edge of the nail plate well with matte varnish to prevent chips from appearing for as long as possible.

How to clean matte nails at home

Surface contaminants can be removed easily or, conversely, difficult. It is especially disappointing if the coating turns out to be damaged almost immediately after its application. Don’t immediately despair and remove it; you should try to correct the situation yourself at home.

How to remove ballpoint pen marks from matte nails

Traces left by a ballpoint pen do not decorate the manicure at all. It is quite difficult to remove paste from a rough surface, but it is possible. Here, using acetone or nail polish remover based on it is suitable. Gently wipe the area of ​​contamination with the mixture.

Important! You cannot leave acetone on your nails for a long time - it will corrode the coating itself.

How to clean matte nails from dirt and soil

It is easy to clean the matte surface from dirt. You can brush them with soap or use a lint-free cloth and degreaser.

How to remove hair dye from matte nails

It is difficult to clean the coating from hair dye - it instantly eats into the surface. There are several ways you can try here:

• clean with acetone;
• wipe with hydrogen peroxide;
• use salicylic alcohol;
• wipe with chemicals for cleaning toilets and bathtubs.

If one method does not work, you need to use another. If the paint does not take anything at all, you will have to remove the coating and reapply.

How to clean matte nails from lipstick

Lipstick marks are not considered difficult to remove. You can clean your nail plates using:

• alcohol;
• hydrogen peroxide;
• toothpaste;
• turpentine.

There are many options, sometimes a thorough treatment with a soapy brush may be enough.

How to clean light matte nails

It is believed that matte nails designed in white or light colors get dirty very quickly. All dirt and stains on a light surface are more noticeable than on a dark one. Therefore, to maintain the beautiful appearance of a light manicure, you need to wipe the nail plates more often and regularly. Small light stains can be removed using alcohol and any products based on it (eau de toilette, cologne), boric acid (this product is available in any pharmacy), or nail polish remover.

How to clean matte nails with rubbing at home

The rub is resistant to water and various types of solvents, so do not be afraid to use all of the above methods for cleaning nail plates - they will not cause any harm to the coating. Depending on the type of contamination, use any convenient cleaning method with improvised means.

What to do if matte nails with rhinestones get dirty

Matte nails decorated with rhinestones can be effectively cleaned only with a brush - the bristles can clean even the most inaccessible places between adjacent pebbles. Removing dirt using a cotton pad or napkin will be ineffective and of poor quality. Depending on the type of contamination, soap is applied to the brush. Instead, you can use an effective remedy that can easily be made at home. To do this, mix baking soda with a small amount of freshly squeezed lemon juice. The resulting paste is applied to the nails, rubbed in with a brush, and then washed off.

How to clean matte black nail polish

Unwanted dirt marks on black surfaces are not as noticeable as on light ones. In addition, deep dark shades look chic in the matte technique. Therefore, black has become one of the most popular colors used to create coatings. If the stains are very noticeable even on a black surface, you can remove them with any of the suggested remedies.

Modern products for non-shiny coating

For a velvet manicure, it is not necessary to use a non-shiny polish. There are other methods, including those available at home.

Top

Matte gel polish is not necessary to create a velvet manicure. A special top is enough. Covering your nails with a matte top coat is done according to the standard scheme:

1. shaping,
2. cuticle treatment,
3. coating with two layers of gel,
4. after each layer, dry the nails with a lamp;
5. applying a matte top;
6. removing the sticky layer.

A matte top will highlight unevenness if the varnish is applied incorrectly. Therefore, jewelry-precise coating application is required. Please note that the top coat will make the polish lighter.

Matte nails with gel polish

Matte nail polish, matte gel polish or shellac are available in an assortment both in beauty salons and in cosmetics stores.

Non-shiny varnish in dark colors looks especially good. You can choose a classic stylish monochrome, or you can combine a velvet base with glossy details, with a pattern:

• Rhinestones look impressive against a dark matte background.
• The use of two colors of sand varnish is laconic and stylish.
• The juxtaposition of velvet and glossy on different fingers is playful and provocative.
• Also trending is one matte nail combined with four glossy ones. And vice versa.

The application of both glossy and sandy coatings is suitable even for the official dress code. But in this case it is better to choose not bright shades.

How to apply matte nail polish? Just like glossy.

Transparent acrylic powder

Using acrylic powder is another way to create velvety beauty on your nails. Another beauty is that manipulations with acrylic powder can be easily done at home. At the same time, the velvety surface will be truly impressive. A coating of transparent acrylic powder is called “velvet sand”.

Acrylic powder is bought in cosmetics stores or ordered online. Consumption is economical, one jar will last for a long time.

Gel manicure is performed according to the standard procedure, but after applying the top, the nails are not dried in a lamp. Gently sprinkle acrylic powder onto the top coat and only then place your fingers in the lamp for 1 to 3 minutes. Then sweep away the remaining powder with a brush.

This option for creating a “velvet” manicure is so simple that even beginners get a gorgeous result the first time.

Dust

Matte dust, like powder, is applied to the sticky layer at the end of the standard gel manicure procedure. Only dust is poured on and applied with a brush. Then the nails need to be dried in a lamp.

How salons clean matte nails of dirt

If no methods of saving manicure at home do not bring the desired result, it is recommended to contact a nail salon. Depending on how the coating was obtained, different cleaning methods are used. If the finishing top is responsible for the velvet effect, then in the salon the top layer of the contaminated area of ​​the nail is carefully filed off, then the top is applied. In principle, the method can be applied at home if you have the necessary tools: matte top coat, file.

Home care

Hands constantly need attention and careful care, so it is very important after a manicure at home or in a salon not to forget about them, but to constantly take care and protect them. Features of caring for nails at home are the following:

1. It is recommended to treat your nails as carefully as possible, constantly moisturize them with cream, make masks using various natural ingredients;
2. To moisturize the cuticle, you should use oils;
3. It is necessary to remove the varnish coating yourself using a liquid that does not contain acetone;
4. Before applying varnish, the nail plates must be degreased. This will allow the coating to stay on the nails for a longer time.

The importance of nail care is difficult to overestimate, since they are one of the components of a woman’s image, emphasizing her sophistication and elegance. We should not forget that they should be looked after not only when problems arise, but constantly, starting from a very early age. It is this attitude towards nails that will preserve their strength and attractive appearance for many years.

The matte design requires special care for flawless application, otherwise the finished manicure will look sloppy and untidy. However, the difficulties in applying a matte finish do not end there, because very often after its implementation the question arises of how to clean matte nails from dust, dirt and cloudiness.

There are several ways to clean matte nails, and they all depend on the type of coating used, because it is one thing if matte varnishes are used for modeling and quite another when the design is done with gel polishes or gel paints. In the first case, it is best to remove dust and dirt using a soft, lint-free piece of cloth, rubbing its surface with confident circular movements until the dust and dirt can be completely removed. The easiest way to remove ink stains from nails is with cologne or any product that contains alcohol. For obvious reasons, using nail polish remover is completely unacceptable, as this product will ruin the design. After this procedure, the matte surface of the coating may acquire a slight glossy effect, to eliminate which you just need to hold your nails over the steam at a safe distance so as not to end up getting burned.

With gels with a matte effect, things will be somewhat more complicated, because most often the material fades or changes color due to an excess of ultraviolet radiation, which often happens when the design is dried in a lamp for too long. For example, a white matte design very often turns yellow after hardware drying and correcting this defect will be extremely difficult, and in the vast majority of cases impossible.

In addition to changes in pigment, matte gel nails very often lose all their shine due to the adhesion of fine dust and dirt, which is easiest to remove with a special cleaning agent, called a clinser among nail design masters. Typically, this degreaser is used to remove the sticky dispersion layer that forms after each drying of the nail design in a UV lamp, because if this is not done, the nails will become covered with dust and small debris in the next ten to twenty minutes. If such a product is not at hand, then it can be replaced with a homemade cleaner made from water and alcohol in a ratio of 70 to 30.

Alternatively, you can use regular nail polish remover, but only on condition that it does not contain acetone, which can even ruin the gel coating, causing a change in pigment and its characteristic clouding. And it is best to give preference to alcohol-based clinsers, since in the vast majority of cases they have the most gentle effect without compromising the integrity and color of the nail design.

The material used for modeling is also of great importance in the matter of cleaning matte nails from a thin dusty film and dirt. For example, matte velvet, which is very often used in nail designs to create a delicate suede texture, tends to get clogged very quickly and lose its original appearance (especially if a woman has to do housework and often wash dishes). And in this case, the situation can only be corrected by completely redoing the design, remembering that even taking all precautions does not help make this modeling option truly wear-resistant.

Read also: Building a brick barbecue with your own hands

Sometimes, in order to freshen up a matte design, you just need to use a transparent nail fixer that has a glossy effect. We are talking about a relatively recently introduced new product, which is very popular among lovers of matte nails.

We recommend reading:

: How to clean matte nails from dirt?

Add a comment Cancel reply

Coating features

It is preferable to use a matte finish on dark varnishes, since the result is almost impossible to notice on light colors. The coating on nails with a “cat’s eye” effect or with glitter looks unusual.

To achieve the desired result, you should adhere to some rules.

• A bottle with a matte topcoat should not be shaken before use. Shaking the bottle will cause bubbles to form. For a uniform consistency, it is best to roll the package between your palms.

• The matte finish is thicker and more viscous than the glossy finish. Do not be too zealous with application - the product should not flow onto the skin of your fingers. A thick layer may not be completely polymerized in the lamp, which will affect the durability of the coating.

• For even distribution on the nail plate, the coated nail should be turned over and held in this position for about a minute.

• It is difficult to paint the area near the cuticle with a matte top. Due to the inaccessibility of the area or the natural screed of the coating during the drying process, a glossy strip is formed after polymerization. To hide this stripe, top coat the plate in two passes. The first layer is painted at the cuticle with a regular thin brush, and the second wide layer is applied to the entire surface of the nail.

• After polymerization, it is necessary to remove the sticky layer using a degreaser and a lint-free cloth, otherwise the coating will remain glossy.

• Any type of top should be kept away from sunlight.

• Do not keep the jar of finish open for long. Toppers, like bases, dry quickly when exposed to oxygen for a long time.

• The finish is applied only after complete polymerization of the color layer. Otherwise, if the color gets on the brush, the top in the bottle will become stained and cloudy.

And finally, a few rules for nail care

1. Don't paint your nails with polish all the time. Take breaks of two to three days (this will help avoid unwanted yellowing).
2. Do not scrape off the remaining varnish with improvised means. There are appropriate devices for this.
3. Always keep an eye on the varnish: as soon as it gets chipped, wash it off immediately. Do not go out in public under any circumstances; unkempt nails can change even the most pleasant impression of you.
4. Dishes should be washed with gloves, nothing else.
5. Excessively long nails look vulgar. Give preference to medium length.
6. Take special baths regularly (once a week) using WARM water.
7. Regularly clean the space between your finger and the nail plate - this is where bacteria accumulate the most (just washing your hands will not get rid of them).

Follow all the rules and your nails will be healthy and strong. And don’t forget to visit a manicurist at least once every month or two.