How to choose a device for manicure and pedicure

Components of the device - quick guide

The device is a power supply with a connected router handle. The cutter attachments are attached to the handle; their choice depends on the stage of work and the area being worked on. The machine works from the network.

Some models are equipped with foot pedals for turning on and off, or speed pedals, which make it possible to regulate the speed of rotation of the cutters by the intensity of pressure.

The pedal is not critical for manicure work. All the necessary levers and buttons are located on the power supply:

• Forward - forward;
• Reverse - back;
• Stop, shutdown;
• Speed.

It is important that the power supply delivers the required power. If it does not produce this power, then the handle does not create the required resistance, and the cutter slips. The minimum required operating power to perform manicure and pedicure is from 30 W. This information is located on the bottom of the device. We'll talk more about power below.

The power supply often contains cells for cutters and a stand for a pen. There is also a power-on indicator light.

Forward or reverse mode is switched by a lever on the power supply. If the handle does not indicate digital speed data, then the scale can be divided into three modes: low, medium and high speeds:

• Low – 5,000 – 7,000 rpm,
• Average – 15,000 – 17,000
• High – 25,000 – 30,000.

Hand – Foot - switches between control modes manually or using a foot pedal.

In models without pedals, the rotation speed of the cutters is controlled by a switch on the power supply. The speed can be adjusted in several modes or arbitrarily set to the desired number of revolutions, depending on the desired intensity in each area being worked.

Please note that some routers come with a built-in overload fuse. If large volumes of work are planned, in the salon, for example, or the voltage often fluctuates, then this nuance is worth taking into account.

The average service life of the motor is 7 years with an average flow of customers. For many craftsmen, the device lasts longer with careful handling and low workload.

The price list of professional devices is from 7,000 to 15,000 rubles. This is the optimal price combination of price and quality.

Differences between an expensive router and a cheap one:

• quality of manufacturing material;
• fewer settings functions;
• the quality of the bearings and alignment during rotation, which gives a burning sensation and vibration;
• a rougher result of nail filing;
• service life - cheap ones quickly fail;
• insufficient actual power: even at a high declared speed, the device does not pull.

Hardware manicure - answering frequently asked questions

The best devices are Korean-made models.

Popular:

1. Strong the most popular model 210 with different handles 102 or 105L
2. Marathon is a Korean brand, slightly cheaper in cost than Strong, but not inferior in quality.

Machines for home manicure and pedicure

For home appliances, 15,000 rpm and a power of 3-4.5 W are sufficient. They are intended for basic care of fingernails and toenails - grinding, polishing, processing of side ridges. To determine which machine for manicure and pedicure is better, 10 devices were analyzed. The 4 devices included in the rating adequately cope with these tasks.

Magic Bits

The “Magic Bits” model has a cutter speed control in the range of 500-20,000 rpm. This allows you to select the appropriate mode depending on your purpose. A digital indicator helps you monitor the settings. The device operates both from the mains and from a battery, and it warns you in advance about the end of its charge. At maximum load, the device operates without recharging for 2 hours.

Magic Bits has an impressively light weight of 400 g, making it easy to transport. However, for transportation you will need to buy an additional case or bag. The kit includes a set of cutters for which a secure lock is provided. This eliminates the risk of moving the attachments and compromising the integrity of the client’s and the artist’s tissues.

This model is portable, so you can easily take it to friends’ houses. This mini-device performs its functions no worse than its stationary counterparts. Because of its ease of use, it is often chosen for training by beginning craftsmen. If necessary, it is easy to select additional attachments for it.

Advantages:

• Fits comfortably in the hand;
• Simple instructions;
• Good build quality;
• Convenient location of control buttons;
• Effectively treats nail plates;
• Quickly removes gel polish.

Flaws:

• It is not very convenient to remove the cuticle with a ball;
• Not suitable for foot care;
• Expensive components.

The device does not have the highest power in the rating - 15 V, so you should not count on fast operation. However, in the reviews there are practically no complaints about the quality of filing, grinding and polishing.

Gezatone 130D

Home device with a power of 7.2 W. The device operates at 4000 rpm with adjustable speed, which ensures high processing speed. The device is suitable for manicure and pedicure. The presence of felt and sapphire cutters allows you to give your nails a neat shape, remove rough skin, and file down artificial plates, unlike nail files.

Gezatone 130D is equipped with 7 nozzles, which can be changed with one movement of the hand. The device operates from the mains and does not heat up much, but it is not recommended to exceed the operating time of 30 minutes. The coating on the attachments is durable, does not wear off for several years and prevents tissue injury.

The machine for home manicure and pedicure involves simple touch controls that require a minimum of movements from the user. For precise processing, it is equipped with a bright LED flashlight that illuminates the desired areas in poor lighting. To prevent dust from entering the respiratory organs, there is a protective screen.

Advantages:

• Low noise level;
• Reverse rotation;
• Small dimensions;
• Convenient bag for transportation;
• Gentle influence.

Flaws:

• The sensor is too sensitive.

According to reviews, nails look well-groomed after using the machine for at least 1-2 weeks. The included attachments help remove ingrown plates and eliminate surface unevenness.

Maxwell MW-2601

The device is intended for use at home. The set includes 4 discs to give your toenails and fingernails a beautiful shape. A special nozzle is provided for polishing the coating. Thanks to the expanded configuration, the device can be used to remove gel polish, grind plates, and process side rollers.

Maxwell MW-2601 operates both from the mains and from a battery, which can withstand up to 4 hours of active use without recharging. To replenish the battery life, a charger is included in the kit. The motor power of 4.5 W is enough to perform hardware manicure and pedicure at home.

The machine is comfortable to use in poor lighting thanks to the presence of bright backlight. It comes with attachments in a durable plastic case, which makes it easy to transport and store. To monitor the state of charge there is a corresponding indication.

Advantages:

• Even removes shellac;
• Comfortable to hold in hand;
• All attachments are useful;
• There is a spatula for removing cuticles;
• Removes dry calluses.

Flaws:

• Does not rotate in the opposite direction;
• There are only felt cutters.

Reviews write that the attachments in the machine for manicure and pedicure need to be fixed better, otherwise they rotate on the axis. Users also note that the battery becomes obsolete in about 3-4 years of constant use.

Sinbo SS 4050

A budget option for home use. Thanks to the 10 attachments included, the milling cutter allows you to remove rough skin, process cuticles, polish the plate and its edges, and correct extended nails without prior steaming.

Sinbo SS 4050 has a drying mode, due to which you can dry applied acrylic and gel polish in less than a minute. The device operates at two speeds, adjustable using the corresponding button. This provides a soft and targeted effect on specific areas.

The power of the motor installed here is 2.5 W, which makes the hardware manicure procedure gentle. The model allows only direct rotation of the attachments, so during operation the skin roller bends under itself and you have to more carefully monitor the position of the client’s hand. The device is powered from the mains.

Advantages:

• Low cost;
• Doesn't heat up well;
• Anatomical body shape;
• Non-slip materials;
• Small sizes.

Flaws:

• There is vibration;
• When installing separate attachments, the noise level increases.

The reviews note that, despite the effectiveness of the treatment, the results of using a manicure and pedicure machine cannot be compared with salon ones.

Criteria for choosing a device for beginners

Before starting to search for the desired model of device, a novice master needs to decide whether he will do only manicures, or whether it will be manicures and pedicures. This is due to the fact that the power of some models may not be enough to carry out a pedicure procedure, and it is worth purchasing in advance one that will allow you to perform the service efficiently.

1. Output power : for manicure 30-60 W, 2 Nm torque, for pedicure - at least 35-65 W, 2 Nm torque. Ideally, for manicure, about 60 W and 2 Nm, for pedicure, at least 65 W and 2.8 Nm torque. With less than the specified power, the milling cutter will not last long and will quickly fail.
2. Speed , revolutions per minute. For professional use, we recommend a device with a cutter speed of 30,000 rpm for manicure and artificial material, and 35,000 rpm and higher for pedicure. For home use, you can consider models up to 25,000 rpm.
3. Collapsible handles . Please note that the handle must be dismountable in order to be able to change brushes, springs, and collets during operation. If the handle is not removable, you will simply have to order it separately if it fails, and the cost of the handle is often equal to the cost of the entire device.
4. Availability of reverse mode . Facilitates the work of the master, a prerequisite when choosing a model for the salon.
5. Manufacturer . Give preference to a router made in Korea or the EU. Cheap Chinese machines often break down, and repairs can cost as much as the cost of the router itself.
6. Equipment:

Housing made of metal or plastic (a metal housing is more convenient if repairs are necessary);

Handle with rotation speed 25000-35000 rpm . Choose according to the characteristics of your hand. The handle should lie comfortably between your fingers and be mobile when processing hard-to-reach areas. There are models with a wide and narrowed end. With a narrow one it is more convenient to do a manicure, with a wide one it is more convenient to do a pedicure;

Repair kit with fuses and spare brushes for the handle;

Bag with several compartments;

Basic set of cutters;

Foot pedal - for salon models.

How to use a pedicure machine correctly

Of course, such a device allows you to do a pedicure at home as comfortably as possible and in less time. However, in addition to knowing how to choose a pedicure device, to increase its service life you need to remember the following rules:

• Carefully read the operating and safety instructions that come with the device.
• Wipe the device exclusively with a dry cloth.
• Do not close the clamp on the micromotor if the cutter is not already inserted.
• Do not place the device in close proximity to hot surfaces.
• During the exfoliation process, do not press the cutter on the skin or nail, only lightly touch it to remove the top layer of dead cells.
• Empty the container for collecting exfoliated particles on time.
• Take breaks from work after 20–30 minutes.

If you follow these rules, the device will work much longer.

Carrying out their activities every day, the owner, director of the beauty center, as well as its manager, interact with the state, consumers, contractors, employees, and this interaction is carried out within the framework of the legal framework, an integral part of which is responsibility. When starting your own business, heading a company as a director or manager, you must remember that you will have to solve problems and find ways out of current situations.

Model line Strong

Strong is a Korean-made device, loved by craftsmen due to its practicality, power and ease of use.

There are a number of models, each of which has its own advantages. These are models 793, 90N, 210 and 207.

• Strong 90N at 30,000 rpm - designed for a manicure procedure, it will be difficult to do a pedicure with it. 120 handle.
• Strong 90N at 35,000 rpm - for manicure and pedicure. 102l handle.
• Strong 210 at 30,000 rpm - only for manicure, without pedal. 120 handle.
• Strong 210 at 35,000 rpm - for manicure and pedicure. 105l handle.
• Strong 207 at 35,000 rpm - for manicure and pedicure. Handle 107-2.

Each model is equipped with handles of different power and rotation speed. The data is indicated directly on it.

Advantages of the line:

• Availability of models of different prices, from budget to more expensive
• The ability to choose a powerful milling cutter for working in a salon, which allows you to do both manicures and pedicures
• Long service life without breakdowns, reliability
• Beautiful aesthetic appearance of popular models
• Metal body
• Removable handles for easy repair and cleaning if necessary
• Compactness
• Manufacturer Korea, factory line, 12 month warranty.

Flaws:

• If there is a fuse, it may stop after 10 minutes of operation if it overheats. You have to wait until it cools down.
• Some people are bothered by the silicone stand, which also needs to be placed in the work area, which takes up space.
• The router may seem noisy during prolonged use
• Heavily advertised, which affects the price.

Marathon lineup

Marathon is designed for use in a salon. Can withstand up to 12 hours of continuous use. It is considered one of the most reliable, even in comparison with the “strongs”. Manufacturer – Korea. Milling cutters of this line are considered analogues of Strong at a lower cost.

Advantages:

• The presence of holes for cutters in the upper part, so as not to clutter the workplace.
• Heavy metal handle with plastic coating, tapered towards the edge. Cooled by air flow (only on Strong and Marathon models)
• The cutters go deep into the hole in the handle, which ensures reliable fixation and absence of vibrations (compared to cheap models)
• Corresponds to the declared power and speed, which significantly affects the quality of work and the manicure/pedicure itself
• The reverse mode, which quickly fails or stalls on Chinese models, on Strong and Marathon will last for years without breakdowns
• Cost: cheaper than models from the Strong line and with the same, if not better, quality.

Flaws:

• Some craftsmen note the white color of the device as a disadvantage due to soiling and the need for additional cleaning of the surface.

In general, the lines of these devices can be called leaders for professional and home use due to the optimal combination of price and quality.

Choosing a device between Strong 210/120 and Marathon N2

RuNail lineup

RuNail devices are intended for both salon and home use, for manicure and pedicure.

Craftsmen prefer it because of its power, comfortable handle and reliability in operation.

Advantages:

• The power and speed of the milling cutter correspond to the declared ones, which ensures high quality work in capable hands
• The presence of a pedal, hands free for additional small and precise movements
• Speed, shutdown and reverse are controlled by a slider and a toggle switch on the main unit of the device.

Flaws:

• A set of low-quality cutters included. You will have to purchase a basic or advanced set of good quality in addition to get started.
• 1 month warranty. In online stores – 3 months.
• The handle is not removable; if it breaks, you will have to purchase a new one.

Experts describe the device as one of the best in the budget price category. Initially, it is worth purchasing high-quality cutters, and you can use it both at home and on the road, and when working in the salon.

Milling cutters for the device: types, purpose, how to choose and use in manicure and pedicure

Which attachments to choose for hardware pedicure

Ceramic cutters

This variety is good if you are just thinking about how to choose a pedicure device, and this will be your first acquaintance with its principle of operation. The material used here is quite soft, that is, safe. The abrasiveness of such cutters is in the range of 100–400 microns. To remove the dead skin layer, you will need coarse-grained attachments. For polishing the nail plate, it is better to take a fine-grained one, and for cuticles, a medium-grained option. The disadvantage of ceramics is rapid wear, that is, if you often take care of your feet, it is recommended to stock up on a second set.

Diamond cutters

These attachments are distinguished by their high rigidity, which means they cope with very rough areas without any problems. Diamond cutters are made from both natural and artificial raw materials, which is important to consider when thinking about how to choose a device and components for a pedicure. The former are much more expensive, but also more functional: they are wear-resistant and do not heat up very quickly. Synthetic diamond wears off faster and is better suited for working with hard acrylic.

Carbide bits

They are usually used in the first stages of foot care to cut away large layers of rough skin or hard acrylic.

Sand caps

Externally, this option is very similar to fine sandpaper. The attachments are disposable and are not suitable for sterilization, which must be remembered when deciding how to choose a pedicure device. They are produced in different shapes: cylindrical, rounded, conical.

Polishers

There are silicone and natural materials (wool, cotton) on sale. The former can be used at different stages of polishing, therefore they have different hardness: rough, medium abrasive, soft. The latter are used to obtain deep shine and greater smoothness.

Read material on the topic: Automation of a beauty salon: effective control of your business

TNL MP-18

The device meets the minimum professional requirements for performing manicure and pedicure, and can be used to provide services both in a salon with a small flow of clients, and at home.

Specifications:

• Power 30 W;
• Rotation speed – 30,000 rpm;
• Availability of reverse mode;
• The presence of a pedal;
• Collet type clamp.

Manufacturer – South Korea. The speed control knob is located on the front panel of the power supply. There are also stands-holes for cutters that are used for the procedure.

Advantages:

• Comfortable handle;
• Basic set of 4 cutters in the starter kit;
• Availability of reverse mode;
• Foot pedal;
• Collet clamp for fastening cutters;
• No vibration during operation;
• Minimal noise.

Flaws:

• It cannot cope with a large flow of clients; the device periodically needs time to cool down.

Planet Nails Prime

In the Planet Nails series, this is one of the top options for milling cutters, which is suitable for professional use in the salon. Assembly - South Korea.

Specifications:

• Power 45 W;
• Reverse mode;
• Handle weight 200 g;
• Collet type clamp.

The device comes without cutters and pedals. It has a high cost compared even to classic “strong” ones.

Advantages:

• Modern design;
• Comfortable handle, does not heat up;
• Low noise;
• Availability of reverse;
• Long cord;
• High power for pedicures.

Flaws:

• High price;
• Lack of pedal;
• You will need to buy cutters separately to start.

How to choose a professional pedicure machine

The models we will talk about next are suitable for beauty salons. They are distinguished by high productivity, which is important when serving a large number of clients per day.

How does this device differ from a regular one?

When thinking about how to choose a professional pedicure machine, keep in mind that you will have to pay tens, and maybe hundreds of thousands of rubles for it.

These models of hand and foot care machines are equipped with a built-in vacuum cleaner, a container full indicator, a speed switch and an indicator for the direction of rotation of the cutters. In addition, they are distinguished by fast switching of rotation modes, they are not afraid of overheating and last a long time.

1. "Podomaster Classic"

and
“Podomaster Professional”
from manufacturers from Germany.
Such units cost about 100 thousand rubles and are created specifically for professional work. 2. "Moon"
.
The device was developed by German. Let us note that it was in this country that the first pedicure apparatus was created. The latest generation technology has several speed levels and is virtually silent. “Luna” has a comfortable handle that does not heat up during a long procedure. There is a touch panel on the side of the device. All these devices simplify the care session and make it more comfortable, which is useful to know if you are wondering how to choose a pedicure machine. Price from 100 thousand rubles. 3. Pedo Sprint
. Another device comes from Germany and costs around 130 thousand rubles.

The equipment in this series uses the following systems:

• SILENT – the noise level of the device, turned on at full power, does not exceed 60 dB. This makes such devices one of the quietest among all those presented today.

• POWER – SP series devices use more powerful handle motors and clamping devices. Since a higher torque is generated, the cutter does not stop even with strong pressure on the surface being processed.
• ANTISMELL – system for eliminating unpleasant odors. Activated carbon filters make working with devices in this series more comfortable and hygienic. If you are thinking about how to choose a pedicure machine with such a system, keep in mind that now a specialist can change these filters himself, without resorting to the services of a service center, as before.

Read material on the topic: Doodling on nails: drawing and relaxing

Irisk JD 400

The device is suitable for home and salon use by beginners. It is recommended specifically for initial practice, as it copes with the necessary functions, gives you the opportunity to get better at it, and at the same time has a low cost in comparison with leading brands.

Specifications:

• Power 35 W;
• Speed ​​25,000 rpm;
• Reverse mode.

Advantages:

• Low noise, no vibration;
• Suitable for novice craftsmen working at low speeds to get the hang of it;
• Comfortable and light handle;
• Price;
• Compact and lightweight processor;
• Long handle cord;
• Presence of reverse.

Flaws:

• The starter set of attachments is not of the best quality;
• May not be able to cope with complex pedicures that require lengthy work;
• No foot pedal.