Decorating bottles for a wedding - the best design projects for stylish events + 67 photos
A wedding event is one of the most important events in the life of every person.
Any attribute that is present here must be harmoniously and pleasantly decorated, since any slightest thing can ruin the whole holiday.
It is worth noting that at such an important event, even the simplest trinkets are often decorated, which will attract the attention of guests, ultimately leaving a good impression of the holiday.
In Russia, there has been a tendency to beautifully decorate one of the most important attributes - bottles of champagne. These are not simple bottles that are opened at a wedding event, but those that symbolize the continuation of marriage and family lineage.
To do this, take two bottles, each of which stands in the most visible place during the celebration and remains untouched until the end of the holiday.
It is a year later that the first bottle is opened, which is how the first wedding anniversary is celebrated. The second bottle opens on the birthday of the first child.
It is very important that even such a symbolizing attribute is colorfully decorated. This is not a simple champagne, but one that is of great importance to the family.
Ways to decorate champagne bottles
Among the ways to decorate champagne bottles you can find both the simplest ones, which everyone can master, and the more labor-intensive and expensive ones, requiring maximum care and diligence.
Elegant fur bags for champagne for the New Year holidays
Simple decor options include decorating a bottle with tinsel, serpentine, sparkles and other New Year's decorations. You just need to attach them to the bottle, wrap them around in a spiral or make a bow out of them. This method of decoration is more suitable for champagne that will be on the table, for example, during a corporate event or a holiday party.
Decoupage of New Year's champagne, decorated with tinsel
You can quickly and easily decorate champagne using thermal stickers or custom-made labels with suitable images, inscriptions, and congratulations. For such decoration, you will need to remove old labels, so the bottle should be immersed in hot water for a few minutes, carefully removing the paper when it gets wet.
Thermal stickers for bottles with a New Year's motif
Advice ! Champagne is usually served chilled, placed in a bucket of ice. In this case, you should get by with a simple tinsel decoration or decorate a bucket. In addition, you can draw New Year's patterns (snowflakes, frosty ornaments, themed inscriptions) on the bottle using special contours or sparkles.
Elegant decoration of champagne and ice bucket made of stones
In order for champagne to emphasize the spirit of the holiday and match the setting, when decorating the bottle it is worth starting from New Year's themes, symbols, and shades. Almost any materials that are easy to find in both regular and specialized stores are suitable for decoration.
Themed linen bags for decorating a New Year's drink
The most popular creative ways to decorate champagne bottles are:
- Decoration with ribbons.
- Decoration with candies.
- Decoupage.
- Painting.
- Making decorative wreaths.
- Making decorative bags.
All these methods have varying degrees of complexity, so you should focus on your skills when choosing the appropriate one.
Colorful New Year's decoupage of champagne
How to decorate bottles for a wedding
Very often, recently, newlyweds use the services of designers who design a festive bottle to order. The couple themselves can come up with a concept that suits them completely.
But it will be much more interesting to decorate bottles for a wedding with your own hands, because in this process it is important to put your soul and desire to fulfill what they symbolize.
To do this, in order not to think for a long time, you can look at photos of decorating bottles for a wedding on the Internet. You can either choose a suitable design or come up with something of your own based on other people’s ideas.
The most pleasant design is considered to be the one that the newlyweds not only came up with together, but both of them did it on their own.
Flowers made from polymer clay are considered one of the most interesting, and most importantly, suitable ways to decorate a bottle. Thus, decorating champagne bottles for a wedding will strongly resemble the bride's outfit and will pair beautifully with the wedding dress at the event.
The only thing is that such decoration is very popular, so more and more newlyweds are resorting to other decoration methods.
Photos of the newlyweds are another good way to decorate bottles. In this way, you can take photographs from the shooting of a “love story” or other photo shoots, or early photographs of the couple.
These don't have to be pre-holiday photos at all. It is best to choose those pictures that resemble the most interesting moments in the life of a couple even before marriage.
DIY wedding bottles made from satin ribbons: master class
An easy and fairly inexpensive decor option is to decorate with satin ribbons . There are several ideas:
- completely cover the bottle with tape;
- leave the foil on the bottle open;
- Cover the bottle with several layers of tape.
Photo of decorating bottles for a wedding with your own hands
Decorating a bottle of champagne with ribbons looks beautiful when they in some way repeat the bride’s dress and the groom’s suit. For example, in one bottle we recognize the style of a dress, in another – the ribbons are matched to the tone of the suit. The amount of decor depends on your desire and skill.
If the wedding celebration is designed in one color, then it must be reflected in the table paraphernalia
To decorate you need to prepare:
- scissors, soldering iron, large needle and utility knife;
- two bottles of champagne, it is better that they are of different shapes and sizes;
- satin ribbons of the desired color;
- PVA glue, textile glue and liquid nails;
- various decor (beads, sparkles, rhinestones, hats, hearts, etc.).
Weaving begins at the neck; it is the most difficult to design. The tapes are cut into small pieces, and each subsequent piece should overlap the previous one and fit tightly. The length of each subsequent segment should be slightly longer than the previous one, as the neck of the bottle expands. It is better to choose tapes with a width of 2-2.5 cm; it is more convenient to work with. It is better to cut the ribbon after you try on the required length on the bottle.
All pieces of tape on the neck must be fixed with glue, and do this carefully so that the glue does not bleed through the fabric. Your braid should resemble a braid. Then the bottle is pasted over in a circle. It is difficult to give an exact answer as to how much ribbon is needed to decorate wedding bottles. The narrower the braid, the greater the consumption. With a standard ribbon width, it takes an average of 5 m, but remember that you will need ribbons of different colors.
Photos of wedding bottles made of satin ribbons
The bride's skirt is decorated with bows, a veil, possibly a wreath or hat; additional decor for the "groom" bottle can be buttons, a butterfly, a small hat or a top hat. Here everything depends on your imagination and skills. Any of your ideas can be brought to life, the main thing is to do everything carefully and tastefully.
Making your own decoration
Engraving is used to decorate glasses and bottles for weddings. Here, it would seem, flights of fancy will not be enough; specific approaches and methods are needed.
But no, with the help of engraving on bottles you can not only write something, but also draw it. It turns out even more beautiful than just gluing a photo to a bottle.
Doing it yourself is difficult, but possible. Such bottles can be stored for many years even after opening, as a keepsake.
Decorating with ribbons
For work we will need:
- white satin ribbon – 10 m;
- black satin ribbon – 8 m;
- golden satin ribbon;
- lace – 10 cm;
- wide white bow or nylon ribbon;
- Moment glue, pencil, ruler, scissors, thread, needle.
In this master class we will look in detail at making a bride's dress, since this is the most difficult thing.
First of all, you need to carefully remove the labels from the bottle.
On a note! In order to do this job faster, you need to soak the bottles in water for a while, this makes the labels easier to clean off.
We cut the required length of lace along the neck and glue it in the same way as in the photo.
Related article: DIY paper bag for a gift on February 23
Now we proceed to gluing the thin satin ribbon. Since the bottle expands towards the bottom, it is better to cut off the tape after gluing each turn, this will take less time to work. Lubricate the bottle with glue, grabbing a little of the previous turn of tape, and glue it.
Advice! To prevent your drawing from moving to the side, it is recommended to draw a line with a marker along which you can align.
So we cover the entire bottle.
Now we sew a skirt that will consist of three frills. In order for our skirt to turn out fluffy, you need to take about 1 meter of nylon tape for each frill. Using a thread and a needle, we make these 3 ruffles.
Glue a golden ribbon onto one frill.
Let's assemble our skirt.
Here is our outfit for the bride, you can add beads or rhinestones, if desired.
The groom's outfit is made in the same way.
But how to decorate bottles for a wedding with your own hands?
In this case, handicraft elements come to the rescue and help you create a unique bottle design.
The newlyweds can come up with all sorts of interesting things - small crafts, origami, ribbon design, and anything else that comes to mind. Such bottles turn out to be very beautiful and aesthetically pleasing and will fit into any interior.
Decorating with ribbons is a hand-made item that requires special attention when decorating. You need to do everything exactly according to the instructions, since you can ruin a lot of material and still not do anything meaningful.
How to decorate champagne for a wedding: materials and preparation
One of the favorite techniques is to draw a parallel between champagne and newlyweds, to “dress up” the drinks in the costumes of the bride and groom.
If the wedding is non-alcoholic, then you don’t have to give up the tradition, but simply replace the alcoholic champagne with an effervescent drink, for example, lemonade. It is important that the bottle has smooth shapes so that its outline resembles the silhouette of a person.
If you don’t want to take two identical drinks, you can take different ones. For example, cognac, wine. But in any case, they should resemble in their shape the silhouettes of the newlyweds and be decorated in the same style.
Typically used for decoration:
Champagne decoration for a wedding does not have to represent the bride and groom. It can be either a lush style or a more restrained one, but with traditional wedding paraphernalia - flowers, hearts, rings (if it fits into the style of the celebration).
Before decorating, be sure to wash and clean the surface of the glass so that dust does not interfere with the bonding of the material and glue. It is best to think through the design in advance, and not create on a whim.
The meaning of champagne
Champagne is a symbol of celebration and carefree happiness , which fits perfectly into the wedding menu and decorations.
A sparkling golden drink accompanies the ceremony from beginning to end. Toasts, the first kiss of the newlyweds to a deafening “Bitter!” Perhaps at the banquet there is a place for a whole fountain or a tower made of glasses.
It is important that the champagne is of good quality, but if you want every little detail of the wedding to be perfect, then you should think not only about the content, but also about the form - about decorating the bottles.
DIY decor master class
If you decide to create a unique design yourself, then first you need to prepare the surface of the bottle.
The easiest way to remove the label is to place the bottle in a basin or large pan filled with warm water, add dishwashing detergent and leave for half an hour. After soaking, removing the paper and glue will not be difficult.
Next, be sure to degrease the surface. Any alcohol-containing solution or even regular acetone will be suitable for this. Both alcohol and acetone can only be applied to a completely dry bottle.
Now all that remains is to choose the design for your champagne.
There are many options - delicate lace, beads, polymer clay figures, fresh flowers. Below are two of the easiest master classes that allow you to create small masterpieces with your own hands.
Satin ribbons
A shiny, flowing material, beautiful both on canvas and as details , is perfect for decorating wedding bottles. Such decor does not have to be pure white. You can easily add soft pink, blue or lilac, and if the wedding theme allows, then a rich, bright palette.
Decoration steps:
To make the design more solemn, add several strips of brocade ribbon. Usually in the center - the fifth and sixth layers of the top decoration, and at the very bottom.
Velvet suits
The velvet design looks luxurious and aristocratic. The material has excellent stretch, which makes it easy to sew the necessary champagne clothes of almost any style from it. The colors can be any, but the classic combination is a white bottle for the bride and a black bottle for the groom.
You will need:
Decoration of a bottle with champagne ribbons
Using ordinary satin ribbons, you can create an exclusively decorated bottle of champagne for the New Year that will look elegant, noble and very stylish. Depending on the auxiliary materials, it is easy to change the basic design.
A light bow made of transparent ribbon will decorate a dark bottle of sparkling wine.
For this decor you will need:
- Satin ribbon - approximately 3.5-4 m with a width of 1.5-2 cm.
- Satin ribbon in a contrasting shade or brocade - 1.5 m.
- Transparent glue, for example, Moment.
You can easily create a Christmas tree decoration for champagne with your own hands
Advice ! It is better to match the brocade ribbon to the color of the foil that is wrapped around the neck of the bottle.
Beautiful multi-colored champagne decor, complemented by a bright ribbon
We decorate a bottle of champagne for the New Year with ribbons:
- Wrap the satin ribbon around the neck in the shape of a V so that it extends to the bottom of the foil. This will be the first layer, after which you need to cut off the excess.
- In the place where the tape will be located, apply a few drops of glue to the bottle, then attach a piece to them and fix it, pulling the fabric tightly.
- Glue the next 3-4 layers in the same way, slightly overlapping the previous ones; only the length of the segments will change.
- Using the brocade ribbon, make 2-3 more rows using the same principle.
- Wrap the bottom of the bottle around with brocade ribbon so that its edges are connected on the back side, fixing everything with glue.
Sequence of actions for ribbon decorating the entire bottle
- Similarly, make several rows of satin ribbon, wrapping the bottle from bottom to top. There should be a gap of 1 cm between the upper section of the satin ribbon and the lower V-shaped one made of brocade. Make sure that the edges of each section are connected in line with the previous ones.
- To hide the seam, you need to take a piece of satin ribbon, insert it under the very bottom row, coat it with glue, and then pull it tightly upward over the joints of the edges, securing it in the area with open glass.
- Wrap the bottle in the place where the uncovered glass remains with brocade tape, securing its edges in front.
The result of New Year's ribbon decoration of champagne bottles
This created a base for further decoration. Next, you can decorate a bottle of champagne with beads, a bow, lace snowflakes, a composition of pine cones, a wreath, crystals, etc.
