Home House and cottage Do it yourself
Holidays and important dates in life do not occur too often to be celebrated in an ordinary setting. You always want to create an atmosphere of celebration and convey the whole range of emotions, even in the smallest details. This applies to the festive table, clothing, and interior.
Particular attention is usually paid to the interior. Decorating a room for a holiday has already become a good tradition. Let it be New Year or a birthday, or a wedding celebration - there will be decorations around. If the New Year has its own specific decoration, then birthdays and weddings are somewhat similar.
And of course, both holidays cannot be done without balloons. But it’s commonplace that hanging them around the room is not always the right decision. But creating compositional figures or images from balloons is both beautiful and interesting. Moreover, such compositions will always attract the attention of guests and leave a pleasant mark on the memory of the holiday.
But ordering such beautiful decorations is not always affordable or not possible due to the territorial location of the venue. In this case, you should not push ideas with a similar design to the far corner. Since it will not be difficult to assemble decorations of any size and complexity yourself.
There are many options for assembling balloon shapes. Some of them are relatively not simple, but there are also those that a child can do. As a rule, to make any figure, a frame is required, which, in turn, can be made from a variety of materials.
Assembling, for example, a heart from balloons for a wedding or anniversary will take no more than two hours. And in the case of choosing a frameless connection, even less.
Heart made of balls with a wire frame
Assembling such a composition yourself will not be difficult. And this thing can be used in completely different ways. For a wedding or an anniversary, for a declaration of love or as a gift - this beautiful design will fit anywhere. Moreover, since the base will consist of wire, the shapes of this decoration are not limited in any way. The result of such work will be a durable figure, which will be designed to be installed on the floor and, if necessary, can be moved to any place.
A heart made of balloons, assembled in this way, is usually used to decorate festive halls. For example, if a wedding celebration is being decorated, then this form can be placed at the head of the table for the newlyweds or at the table with gifts.
The versatility of this type of decoration is unambiguous. Since the item will ultimately have a certain weight, it can even be installed outdoors. Without fear that the composition will be blown away by the wind.
If necessary, the figure can be attached to the frame of an arch or front door, since with a wire base, fixing the figure will not be problematic.
If the made size allows, the item can be carried with you. Which will allow you to make a surprise anywhere. For example, in a cafe or outdoors.
To assemble such a structure, you will not need many materials and tools:
- Medium hard wire
- Balloons (five inches)
- Scotch
- Scissors
- Rope
The wire should be of a type that would hold its shape well, but at the same time not be difficult to bend to give it. You can find such material in high-voltage cables. As a rule, one cable core, approximately three to three and a half meters long, is enough. However, it can be any material that can be bent and does not lose its shape.
You will need a lot of balloons. Five-inch ones are most often ideal for this type of assembly. On average, for three meters of wire, you need about two hundred balls. The quantity, of course, will depend on the degree of their inflation, but as practice shows, more than 250 (including damage) is enough.
You will need wide tape. Color and transparency do not matter, since it will not be visible when assembling the composition. Any scissors will also be required. Paper ones will also work. They will be needed for cutting tape and rope.
A rope will be needed if the structure needs to be secured. For example, outdoors or above the floor surface. The length and type of rope should be selected depending on the needs for its use.
It is best to choose a type of wire so that it cannot bend, for example, if accidentally touched or caused by a gust of wind. And also, it is worth paying attention to its oxidation. It will not be pleasant if, when transferring the composition, your hands get dirty, not to mention your festive clothes.
Assembling this figure is very simple. First, you need to give the wire a heart shape. But this should be done in a certain way. By connecting the ends of the future frame to each other, it is necessary to give the workpiece the shape of a circle. The ends of the wire should be fastened with an overlap and using tape. It is better not to waste scotch tape, since the future shape will depend on the strength of the connection.
Having stepped back a few centimeters from the gluing site, you need to bend the wire at an angle. This will be the base of the heart. When bending the upper part, you must remember that there should not be an acute angle between the halves of the heart, but an even gap of approximately ten fifteen centimeters. This is necessary for even attachment of the balls.
The balls themselves need to be connected in four pieces. The most convenient way to do this is to inflate them. The balls are tied not with thread, but with each other. First there are two balls, and later two more are attached to them. The balloons should be inflated in such a way that in a bunch of four pieces, they do not push each other out, but also tightly touch the edges.
On average, about forty such parts are needed. Sometimes more. After they are all ready, you should start putting them on the already finished wire. Dress it so that the frame wire passes through the center of the ball joint.
Once all the parts are put on the frame, the balls should be aligned so that the shape looks symmetrical, and if there is a pattern, it does not fall out of the overall picture.
Manufacturing stages
First, you need to make a heart-shaped base from wire 3.5 meters long. Connect the ends of the wire and secure with transparent tape. Try to make the frame even, otherwise you will end up with a crooked decoration.
Editor's choice: Wedding table: dishes and sample menu for guests
Then you should inflate the balloons and tie their tails together. Then inflate two more balloons and tie them together. Now twist these two pairs together. You should end up with clusters of four balls. To make a heart, you will need to make 40 of these clusters.
Once the balloons are inflated and secured, you need to start stringing them onto the heart shape base. All this is done until a beautiful fiery heart is obtained.
Heart made of balloons with a ring in the center
This method is a little more complicated than the previous one. And it is designed more for balloons filled with some kind of gas. Since the figure itself turns out to be quite voluminous and not suitable for mounting on a wall or somewhere else.
In order to make such a heart, you will also need five-inch balls, a plastic ring and threads. You may also need cardboard paper to make the core.
This design can be used at street celebrations or to release your heart into the air at the end of the evening. Also, if the size is not very large, the composition (or several pieces) can be fixed as a decoration for paths or improvised arches.
But this is about decoration. And in terms of a gift, such a heart is suitable for any celebration. And for the celebration of birth, and for the date of all lovers, and for a declaration of love. Even on a first date, such a beautifully decorated bouquet of balloons would be appropriate to surprise.
Decoration of cards can also be installed with such compositions. Not to mention decorating a carriage or other original vehicle.
To make such a heart from balls, you will need the following materials:
- Inflatable five-inch balloons
- Plastic ring
- Thin tape
- Scissors
- Threads
- Rope
- Gas
You will need balls similar to the first option. Same size and density. Only they need to be inflated with some kind of volatile gas (for example, helium), so that the entire composition stays in the air.
It is better to find a plastic ring, which will be the center of the entire structure, made of lightweight material. For example, one that holds curtains or from a children's toy. About five centimeters in diameter. It is possible to use the rim of a plastic bottle after cutting off the sharp fasteners. But only if the heart size is not expected to be large. Regular office tape will do. To complete the creation of the heart shape, they will attach the threads to the ring and, if necessary, fasten some balls together.
You will need threads that are dense and not torn. It is best to choose a color that matches the color of the balls and rings. So that there are no sharp contrasts. The rope is needed only to make a cord out of it for fastening or to hold the heart in your hands. A gas cylinder should be purchased specially for creating aero compositions. And calculate its volume by the number of balls in the mold.
Creating the composition itself should begin by inflating the balloons and tying a thread to them, long enough to secure the ball at a distance from the ring throughout the entire shape. The first balls, which will represent the base, should be attached as close to the ring as possible. It is better to keep the distance between the balls to a minimum, but at the same time it should be possible to tie the following rows to the ring. Thus, row by row, the balls should be secured to the ring, tying them with thread. To create the shape, you can use tape to hold the heats together. And also by adjusting the frequency of tying on one side or another.
Upon completion of formation, the ring should be tightly wrapped with tape to avoid untying the knots. And also attach a rope to it. If necessary, you can thread cardboard paper into the ring, to which, in turn, you can attach a postcard or any other core.
When forming a heart, calculate in advance the number of balls in all parts of the figure. In order to avoid uneven corners or irregular shapes.
Loops and arcs
A modest but expressive heart will be created if you collect 12 lincoloons in a chain, and fill the gaps at the attachment points with “quatrefoils” made from 5″ round elements. The main secret is the correct placement of the “fours” in the upper and lower parts of the heart, with the help of which the shape is created - they need to be moved to the very bottom of the connection.
Using the pliability and plasticity of the ShDM, you can make heart-shaped balls. To do this, you need to roll each “sausage” into a circle and tighten the joint using another grinder, tape or tape, and form the lower acute corner manually by lightly squeezing the ball.
On the basis of braids and SHDM chains, twisted figured hearts are made that do not require a frame base.
- You need to take 8 “sausages”, linked 4 in a “bouquet”.
- On the first four (in pairs) it is necessary to form bubbles, between which pairs of the second four should be threaded.
- With these pairs you need to braid the bubbles of the first set and fix them. This creates the top part of the heart.
- The ShDMs available on each side are intertwined into pigtails and connected at the base.
There are more and more techniques and schemes for creating a love symbol every day, a wide selection of consumables allows you to create more and more original images, but the fragility and tenderness of the material requires caution and some skills. You should not begin your acquaintance with this decorative trend by creating complex figures - it is better to opt for a laconic option, in which the possible replacement of one segment does not affect the final result.
Here you will find classic design options, but when there are many examples in photographs, it will be easier for you to tell the designers about your vision.
If you are in Moscow, call us, we will answer all your questions, calculate the approximate cost, and offer several options for decorating the hall at your wedding.
Chains of balls
I love chains for their elegance and perfect shape. They can be used to zone the space, highlighting the most festive area of the wedding hall. The ends of the chains can also be attached to the floor, but if you use racks decorated with bunches of balls, fabric and LED garlands, the results will be simply magical!
If you make several chains and place them on top of each other, you get a magnificent airy background. A particularly successful design move for those cases when there is no wall behind the seated newlyweds and witnesses.
You can build a tunnel from chains (we cover the weights with paper flowers or ribbons). And if the balls are attached not to the fishing line, but to the railing, you will get a charming decoration for the staircase. By the way, these are the balloons that can be used at the end of the holiday to launch into the sky :-).
Fairy lights
These garlands are made from balloons without helium and can decorate a room for a long time. Here are the options for railings:
This garland makes magnificent arches. The combination with artificial flowers and vines is an excellent solution.
Garlands can be multi-colored. Look how different these balloon wedding decorations look!
Hearts, rings, swans
Balloon hearts are a classic of the genre. It's really very romantic! Most often they are placed above the heads of the newlyweds.
There can be one heart for two, but in this case you can add other elements made of balloons and drapery made of airy fabric.
Wedding rings and balloon swans are also quite popular. The price depends not only on the size, since the figures can vary greatly in the complexity of execution. Here are examples:
The figures can be tied to a “cloud” of balls. First, we take a long, long time to take pictures with all this beauty, and then we solemnly launch it into the sky. So romantic…
You can make letters and numbers from balloons (if you suddenly want to immortalize the date of the celebration or the initials of the lovers). .
Oh-very big balls
An incomparable solution for wedding decor! I especially like it when wide bright ribbons are tied to these huge balls (diameter 40-50 cm). The decoration is quite noticeable, you will agree.
Balls can be tied to chairs or simply released to the ceiling.
Bouquets of balloons on tables
Such balloon decorations are suitable for crowded weddings, because one decorated wall next to the newlyweds’ table will not be visible to all guests. In this case, we will place a small bouquet of helium balloons on each table. The threads should be long enough so that guests can see each other's faces.
Floor columns and bouquets
In some rooms, installation of balloon figures is impossible for technical reasons (or simply prohibited by the owner of the site). In this case, huge floor bouquets and fountains come to the rescue. Some of them are attached to special stands, and “fountains” made from helium balloons do not require the use of additional structures at all.
The columns also look great (they are woven according to the model of the familiar “4-ball” garlands). Chains of balls attached to such columns look very solemn.
Arches and gazebos
These are the most monumental structures made of balls; their installation takes a lot of time. Most often, such arches and gazebos are built in large rooms with high ceilings or in the fresh air for holding the formal part of the wedding ceremony.
Heart shaped balls on a grid
This decoration is easier to make than previous options. But it is limited in the ways it can be used and applied. The shape formed in this way is most often used to decorate walls or curtains. Or any other flat surface. It doesn’t take much time to make such a decorative element. And there are not as many used parts in it as in other examples.
The finished composition is easy to use at any celebration. This decoration is attached to a wall or curtain using hooks or pins. And since the size of the heart is limited only by the number of balls, in addition to the heart itself, a drawing or pattern can be drawn on it. For example, numbers or the first letters of names. And from several such hearts you can easily make a word or a date.
The convenience of this design is that it is not picky about the bends and angles of the surface. And completely calmly, it can be installed both on the corner of the room and on the round surface of the column. When attached to a curtain, it will also take the shape of the curtain itself.
To make such a heart you will need:
- Standard five inch balls
- Mesh or its equivalent
- Threads
- Fastenings (hooks or pins)
- Scissors
When creating such a heart, it is best to inflate the balls more tightly for better volume. Since they will be mounted on the same plane, it is better to place them very close.
You should choose a dense mesh for attaching the balls. A large fisherman would be best. But such a network is not cheap and therefore there may be its analogues. The sizes depend on the desired size of the future heart. It is best to choose nylon and thick threads. This way it will be as convenient as possible to attach the balls to the canvas. Moreover, such a thread better retains air inside the ball.
Depending on the future location of the figure, fasteners should be chosen from wall hooks or regular pins. In the case of placing the heart on the wall, hooks are best suited. And on the curtain, it is certainly more convenient to attach with pins.
Absolutely any scissors will do, the main thing is that they can be used to cut the thread and, if necessary, trim the mesh.
Avoid using plastic mesh as they tend to curl up and sometimes have sharp edges. Which can cut the thread or pierce the ball itself. And also, such a mesh is much more difficult to secure.
The production of such a composition should begin by cutting out a shape from the mesh. This way it will be easier to determine the number of balls and check the attachment location in advance. After the mesh is ready, you should inflate several balls and, approximately, set the required number. Then start attaching it to the mesh itself.
You should start fastening from the edges, using a thread, directing lines to the base of the form. The balls should be very close, but at such a distance that they are vertical from the surface of the net. In the case of drawing a pattern, you should calculate the pattern of the pattern in advance and attach the balls according to it.
The outer balls, so that they do not fall apart, can be secured with double-sided tape to the rest, or you can attach an additional row around the circumference.
Create an airy heart
- balloons (single color or multi-colored). In total we will need 150 - 200 pieces;
- strong steel or aluminum wire with a diameter of 0.5 cm. To make a heart 1 meter high, you will need 3 meters of wire. Depending on the desired size of the figure, change the length of the wire;
- compressor or hand pump for inflating balloons;
- pliers for working with wire, tape and thread for tying balls.
To better understand the process of creating this decorative element, watch the video of the DIY balloon heart master class.
Making a heart out of balloons with your own hands is not at all difficult! This decorative element will be an excellent decoration for your wedding and a wonderful gift for your loved one on the anniversary of your relationship or on Valentine's Day.
Heart is a very fashionable composition consisting of balls.
If you want to make a heart that is 70 cm high, you need 100 balls, and for a height of 1.7 m, you need 200 balls. To do this you will need:
- large diameter balls for the chain on both sides, which have two tails (for inflation - at the bottom, for attaching the next ball - at the top); — balls of smaller diameter for decorating the jumpers of the garlands themselves; - ribbons and foil. Buy balloons of different colors that will harmoniously complement each other. Before you start, you should know that each ball has a hole with which it is inflated. From now on it will be called the “tail”.
1. We complete the basics - a load for the heart in case to prevent it from flying. Pour water into the ball. We tie the ball and place it on top with its tail in the middle of the round foil for flowers and begin to gather the foil around the tail without covering it, leveling the edges of the foil. To make such a bouquet lush, use a couple of layers of foil. You need to choose it with a pattern so that the whole bouquet looks elegant. 2. We begin to inflate a large balloon, tie it strictly tail to tail, and then connect them without a thread. You need to practice in such a difficult task. But if you succeed, the work will go much faster, and it won’t take much time and effort. Then we inflate a large balloon and tie it to the previous balloon with the upper tail.
Then we inflate and form a chain of balloons. The number of balls directly depends on the overall size of the heart, only it must be strictly even, so that later it can be easily given the desired shape. We tie the last large ball back to the tail. 3. We begin to inflate small balloons and connect them together by their tails. We blow two more balloons and tie them. Take two bundles of 2 balls in your hands, combine them in the center and begin to twist two balls together from different bundles to form one strong one of 4 balls. You need to create as many fours as there are jumpers from the tails between the balls, then we connect the necessary places by screwing small balls around the large ones, thus securing the structure.
4. When you have created a chain, decorated it with small balls, create a heart out of it. Decorate the connection of the two halves of the heart with a decoration made from foil and small balls or a bow.
5. We connect the heart with tape; traces of it must be washed off with kerosene after the celebration. This is a product that can dissolve any tape. Decorate the composition with flowers and sparkles.
Perhaps your friends, whom you invite to do such an interesting thing, will do everything quickly and beautifully. The work requires 2-3 people who will clearly indicate all responsibilities. In this case, the work process will go faster, you will create a real masterpiece.
Thanks to the imagination and skills of creative people, the process of decorating festive events is constantly being improved. Everything you need to decorate your premises is now on sale.
Decorating with balloons is considered the most popular option for a celebration - it always creates a festive mood. The advantage here is that you can use balloons to create a unique composition and decorate the ceiling, tables, walls, etc.
Those who have not personally encountered the process of choosing balloons most often do not even imagine that they differ greatly from each other in composition, appearance and a number of other characteristics. The main criterion for choosing balls for should be the quality of the product.
Regular balloons
The term “regular” refers to balloons made of latex. They are inexpensive, but at the same time they are not inferior in quality and relevance of application.
It is enough to scatter them on the floor - and they will already decorate the room. You can also make chains from balloons and secure them above tables or in another suitable place.
Often such balloons are used to decorate a wedding procession. In this case, you can use both small plain balls and large ones with a pattern or inscription.
With helium
Helium-filled balloons are considered the most successful option for giving a chic look to the room. Helium is necessary for the balloon to rise up.
Balloons under the ceiling have become very popular. It looks great: by combining different colors, you can create a unique and colorful picture.
For greater effect, you can tie spiral ribbons, which will give the decor a special charm.
But if the ceilings are low, it is better to refuse such decoration, since visually the room will seem cramped.
Also, “standing” balls located on the table or on the floor will become the main decoration of the banquet hall. But it is worth remembering that when placing such “bouquets” on the table, they are tied to a long ribbon so that the airy beauties do not block the view of the guests.
The number of balls in one bunch can vary from one to seven - a larger number looks cumbersome.
To prevent helium balloons from rising upward, they are attached to a weight, which can be the same balloon filled with a small amount of water.
Foil
Original foil balloons are made of aluminum film, which visually resembles foil.
The originality of this product lies in the fact that the shape differs from the standard oval.
As a rule, foil figurines in the form of the first letters of the name of the bride and groom, hearts, rings, stars, etc. are chosen for a wedding.
The strength of such a ball is quite good, so you don’t have to worry about the reliability of the decoration. The special shine that is inherent in “foil” will add a festive mood.
Balls for modeling
The main feature of such balls is their elongated shape, which is also called a “sausage”. Thanks to this, they can be used to model various figures that will decorate a festive celebration. They come in different sizes, this makes it possible to create aerial miracles.
Most often, flowers or entire flower arrangements are made from such long balls. To do this, they are bent and tied in the right places.
Panoramic
This type of ball looks quite unusual due to the fact that its front part is transparent, and there is a pattern on the inner back wall. This creates a panorama effect. The pumping method is helium only.
It’s worth thinking in advance about how to properly place such an airy masterpiece so that all guests can admire it.
Self-blowers
Self-inflating balloons will be a pleasant surprise for guests. They look like the most ordinary foil balloons, only in this case a stick is attached to the base.
Inside there is a “magic” capsule, after pressing which the inflation process begins without outside help.
LED
LED balloons will be a wonderful decoration for a wedding evening. In fact, this is an ordinary ball with an LED attached to the inner wall. The glow is distributed evenly, with the color depending on the shade of the ball.
The wedding atmosphere will be filled with romance and tenderness with such decorations.
Figures, swans, hearts, fountains, stands, garlands of balloons
The balloon itself is already a holiday, and the aerial composition is a masterpiece. Talented craftsmen are able to create unique jewelry from paper and latex material that will not leave anyone indifferent.
Figures that can be made for a wedding:
- giant wedding rings;
- bride and groom;
- angels;
- stroller.
And, of course, don’t forget about the symbolic swans. It’s not so easy to “invite” the living to a wedding, so you can make them airy.
If desired, you can even make them yourself, the costs are low. Airy hearts are the main attribute of a wedding, don’t forget about them.
Light balloon fountains will add the right festive mood to the atmosphere. The whole composition consists of balls “tearing” upward, which have different heights.
The use of air struts is a very original idea.
A wedding in a classic style will be complemented with them in the best possible way. Alternatively, you can place the stands parallel to the edges of the newlyweds’ table.
It is impossible not to note the effect of aerial garlands. They add a special chic to the festive atmosphere: by combining colors, you can achieve an incredibly beautiful design. Hung around the hall, they will become one of the main decorations of the celebration.
Heart shaped balloons using double sided tape
This method is so simple to use that it will take a minimum of time. But this design is not suitable everywhere and, most often, is used as part of a stationary composition. Moreover, such a composition should be located exclusively indoors, not exposed to the sun and not heated. This is due to the properties of the fastening material, namely double-sided tape. Which tends to come apart when the temperature rises.
A similar design, not only from the heart, can be used when decorating halls for celebrations, cafes or restaurants. And also, quite often, store departments are decorated in this way at the time of any promotions or holidays. This type of decoration is often used at home. Since, if necessary, the figure can actually be disassembled.
Also, the use of this type of assembly can be useful when preparing various kinds of competitions or quizzes, where it is necessary to separate parts of the figure one by one.
To prepare such an installation, you must:
- Regular size balls
- Double sided tape
- Scissors
It is worth buying medium-sized balloons for a faster and stronger construction. It is also worth paying attention to the density of the rubber in the products to be sure that there is no damage during fastening. The tape should be thin and colorless, but double-sided. You should not buy cheap products, as most likely they will not bring the desired result. Any scissors will do. Their task will be to cut the tape into equal parts.
Choose tape by brand. The more famous the manufacturer, the better the product. In our case, the entire durability of the structure depends on it and it will play a fundamental role in manufacturing.
First of all, you should inflate a sufficient number of balloons. To calculate the required number, we can draw a diagram of the future heart on paper. Moreover, in this way it will be clearer and easier to assemble the figure.
Collecting the heart should start from the middle, on a horizontal surface. Balls must be placed with nipples inside the figure. If two layers are planned, for example, a front and a back wall, then the nipple must be directed exactly to the middle of the structure being constructed. We tightly glue a small piece of tape to the ball, with the second surface not peeled off. This is necessary in order to better press the tape. Next, remove the film and attach the second ball to it.
Thus, from the middle we move in a circle, attaching the balls in all directions to each other. If a second wall of the figure is planned, then the nipple can be tied with thread for a stronger grip. The second wall can be assembled separately in the same way and attached to the first in the same way, but using larger pieces of tape.
Where can such decorations be used?
Decorating any room with balloons is always beautiful and bright. With their help, you can easily achieve a festive and solemn atmosphere. You will need little money for such decoration, this is also considered a plus of this design.
Editor's choice: Congratulations on your sister's wedding: what points to consider
Where is it used?
- First of all, this is a room for a wedding celebration.
- May be needed for registration of field registration in nature.
- The newlyweds' wedding car.
- The newlyweds' hotel room for their wedding night.
- Bride and groom area.
- Place for a photo shoot.
Heart made of balloons on a paper basis
This method of collecting heart shapes from balloons is somewhat reminiscent of attaching balloons to a net. But this option has its advantages. Since, on paper, you can give a fixed shape, and it is much more stable than a grid.
As for the complexity of the assembly, there are no particular difficulties in it. Except, probably, finding the right paper size. But for this option, a regular thick Whatman paper will do very well.
This figure can be used for any celebration and anywhere. The main and only limitation is the lack of moisture. That is, it is better not to endure such a heart outside in rainy weather.
But for decorating halls and cafes, it is much better suited. Moreover, due to the ease of assembly, this option is good to use at home, when, as always, there is not enough time for decorations.
To make such a heart, you will need:
- Medium size balls
- Thick Whatman paper (or several)
- Threads
- Scotch
- Scissors
Balls for such a structure are best purchased of medium size and medium density. Such balls are not very heavy and will not tear the paper if it is not too thick. The balloons should be inflated volumetrically for better contact with each other. Whatman paper, which will serve as the basis for the heart, is worth buying the densest one. Depending on the size of the heart, you may need several pieces. But you shouldn’t overdo it, since whatman paper tends to curl up. Also, before forming a figure out of it, you should let it rest for some time under a load to obtain a flat surface.
Threads should be used as thick as possible so that they do not cut the paper. But at the same time, make sure that they fix the air well in the ball itself. Scotch tape can be useful in this case if whatman paper needs to be given some form other than flat. Or for fixing balls, on the other hand. Scissors need to be sharp. In this version of the heart assembly they will play a big role. From making paper figures to cutting thread and tape.
If whatman paper is folded, but there is no time to straighten it, you can use a second one of the same kind and stick its back side to the back side of the first. In this way they compensate for each other's folding. Pay attention to the structure of the glue when gluing. The thicker it is, the more firmly the sheet will hold on.
To make such a heart, you should start by preparing a figure from whatman paper or other thick paper. Before preparing, let the paper rest for a while to take a flat shape. The base of the heart blank should not be made very pointed, so that this part does not stand out against the background of the balloons.
The next step is to prepare the balls. It is worth inflating them to the end and fixing the valve, both with the balls themselves and with a thread. Leaving at the same time most of it for fastening with other balls. You should start attaching the balls on one side, having calculated their approximate number. This is necessary so that there is not enough space on the prepared figure.
Make a small hole in the paper and pass a thread through it. And use it to pull out the valve of the ball with the knot from the back of the Whatman paper. After securing the second ball in this way, tie the first thread to the valve of the second. Do this with everyone.
When securing the balls, make sure that they do not bend from tension and are vertical from the Whatman paper. For a more stable shape, the first two rows along the perimeter should be secured more closely. Since the first balls, as a rule, open up like petals. The finished heart can be mounted on a wall or curtain, as well as on any flat surface.
How to make a heart from one balloon
This is a video tutorial for the really lazy. Making a heart from a modeling ball.
This is such a special long and thin ball. Clowns usually use them to make different horses and dogs.
Your girlfriend will really like this sign of attention for Valentine's Day and will remember it for a long time. Experiment!
Balloon compositions are a bright and beautiful decorative element. They can make the atmosphere of any celebration more joyful and festive. At a relatively low price, you can create a huge number of jewelry options from them. A heart made of multi-colored balloons is the most popular composition at many holidays. It can be a wonderful gift for your loved one on his birthday or on Valentine's Day, it can be used to decorate a wedding banquet hall, the newlyweds' car or their hotel room.
A heart made of balloons looks very beautiful, it can be small or huge, traditional red or any other color. Making such a decorative element with your own hands is not at all difficult; it does not require special skills. If you decide to create it yourself, you just need to stock up on balloons and patience.
There are several options for making this figure: frame and frameless composition. A frameless heart is much easier to make - you don’t need to attach each ball to a wire. But this design has a significant drawback - if you do not fasten the balls tightly together, they can instantly scatter across the hall. But not everyone will like such a surprise. Therefore, it is better not to take risks and immediately make a figure on a wire frame.
Combined method
The combined method of creating a heart from balloons is needed more for a decorative installation and creating not only the heart itself, but also an entire composition next to it.
For example, having chosen the option of fastening with wire and making the heart itself from black and white balls, next to it you can use the option with whatman paper to make some kind of swan bodies. So that in the compartment they would look like two swans looking at each other.
Or, choosing the same method with wire, the center of the heart can be filled by attaching a mesh with balls to it. There are no restrictions in the choice of combinations and only the imagination of the installation author can serve as a framework.
How to decorate a photo zone, arch, walls, hall with balloons?
It is important that all participants in the wedding celebration have only positive memories.
Here you will see how you can decorate your wedding with balloons in an original way:
But over time, some details are forgotten, and to remember the wonderful moments, you need to open a wedding album with photographs. To make them bright and colorful, it is worth considering the design of the photo zone.
Photozone
A photo zone made of balloons for a wedding will be bright and extraordinary. It is important that the area allocated for the photo shoot is in the same style as the festive celebration.
Foil balloons with the first letters of the newlyweds’ names or the word “love” look great in the photo. The bride and groom “bathing” in balloons is also an appropriate and fun option.
Giant balloons look great. At the same time, at the end of the celebration it would be a good idea to give each guest one balloon and organize a joint launch of them into the sky.
Arch
A balloon arch is a chic decoration. Made using two contrasting colors, it will complement the look of any celebration, especially a wedding.
Most often, the arch is placed above the newlyweds’ table and (or) at the entrance to the banquet hall.
The beauty of such a composition is incredible - with a good imagination of the master, you can create a real aerial miracle.
It is important that the composition of the balls does not look bulky. This will ruin the photo. There should be lightness, which is achieved by a moderate number of balls in the frame.
Wall
When decorating a room, you should pay attention to all the details. The walls should not differ from the overall design solution.
For example, horizontal columns symmetrically located around the perimeter of the hall look great.
They are attached to the wall. You can also decorate the walls with air chains.
Hall
A decorated room must have its own style, which should be based on when choosing balloon decor. Despite the fact that balloons are beautiful and festive, if you place them incorrectly or lose your sense of proportion, you can ruin everything.
For decoration, it is best to use two primary colors. There is no point in randomly scattering and hanging balloons throughout the hall - it is cheap and tasteless.
